injector issue...

[DALAZ_68]

so pretty much what im looking for is the injector Seal/grommet that is located between the injector and the manifold...

does anyone have a clue where i can find these...mine were cracked and dry and im not risking reusing em...

so any help would be greatly appreciated...

i found the part number which shows is 16603F , but when i promt the search on courtesy nissan site, it shows a variance of those buggers, and im unsure which to get...anyone that can help would be greatly appreciated...


its the last things i need to get this intake back on and move foward into some fabing work for the intake side of the FMIC piping

[sjbsuperman1425]

Shouldn't you just be able to go to autozone and get them? I'd assume they are the same as the DE's. Or just take one into them and tell them you need four of them and see what they can find you.

[DALAZ_68]

Shouldn't you just be able to go to autozone and get them? I'd assume they are the same as the DE's. Or just take one into them and tell them you need four of them and see what they can find you.

honestly autozone doesnt carry them specific, (i know i work there) all they have is large universal packs and im not down to buy and non work,

so i went ahead and placed an order with West co nissan...roughly looking at 50 bucks for the orings, and 2 lower seals...F it, im done tallying all the cost up anyway, i just want to DRIVE!

[s13drifter88]

theyreb the same as ka24e. get a set from any local nissan dealership

[DALAZ_68]

theyreb the same as ka24e. get a set from any local nissan dealership

i figured that part out after, and even the locals said it was 2-3 day for it to come, so i just went with a not so local, cheaper solution...should get em by tomorrrow.