Today we had time to dyno our stroker package, with surprisingly good results. The first full pull on wastegate (1bar) yielded over 600whp on the Dyno Dynamics through an automatic (Powerglide), and it went up from there.
After 25 600+whp pulls it was time to turn it up slightly. Using our soon-to-be-released Haltech Platinum plug+play standalone, we set the tune overly safe. Then came a few more pulls yielding 750, 800, and we quit for dinner with 880whp at 22psi. This was with minimal tuning: a/f around 10.5:1 and timing at 12 degrees. No eXtra correction added, and atmospheric was 1.06.
Engine: Injected Performance BC 4.2L, Cosworth Heads, IP CamsTransmission: PowerglideTurbo setup: Custom Injected Performance Single Turbo (GT47-88)Management: Haltech Platinum PnP Standalone
Tomorrow we plan on changing the oil and doing some tuning. There is plenty of power left at the current boost with tuning fuel, advance, cam timing, etc. After that, we will continue to raise the boost.
Dyno Video Belowhttp://host.turbo6.net/injecte...p.wmv
Injected Performance 880whp Shakedown DD dyno
-
InjectedPerformance
- Posts: 1182
- Joined: Tue Nov 23, 2004 10:34 am
- Car: 2009 Nissan GTR, 2004 Nissan 350Z, 2009 Nissan 370Z
- Contact:
-
thablackwizard
- Posts: 3
- Joined: Sat Apr 14, 2007 3:21 pm
- Car: 2004 Nissan 350Z
- Contact:
Re: Injected Performance 880whp Shakedown DD dyno (Marty T)
Congratulations Marty, thats one hell of a dyno run.
-
turbo6
- Posts: 303
- Joined: Sat Aug 10, 2002 12:24 pm
- Car: '05 350Z Turbo, '98 SC300 9.3@156, '99 SC400, '02 Police Interceptor
- Contact:
Re: (D4n743m4n)
We just finished the safety requirements for the car today so we will be heading to the track soon!