Impul parts for Versa (Tiida)

Post by **themadscientist** » Wed Aug 16, 2006 1:53 am

I have to admit ignorance of this car up until a couple of days ago. My fiance drives one but here it is a Tiida. It took someone mentioning it being a Versa in the states for me to notice. I guess I should help out the Versa guys too so here is some stuff I found just as a joke to mess with my girl but possibly juicy p0rn for hard-core Versa owners. Impul brings you goodies. I don't know if anybody distributes the stuff stateside, I leave it up to you to chase that down.body kit.

Post by **themadscientist** » Wed Aug 16, 2006 1:54 am

struts

Post by **themadscientist** » Wed Aug 16, 2006 1:55 am

springs

Post by **themadscientist** » Wed Aug 16, 2006 1:55 am

wheels

Post by **themadscientist** » Wed Aug 16, 2006 1:56 am

brake pads

Post by **themadscientist** » Wed Aug 16, 2006 1:56 am

big brake kit

Post by **themadscientist** » Wed Aug 16, 2006 1:57 am

supercharger

Post by **themadscientist** » Wed Aug 16, 2006 1:58 am

tuned computer

Post by **themadscientist** » Wed Aug 16, 2006 2:01 am

They also make a muffler but have not posted a pic on the site yet. Here is the Impul parts page for the Tiida.http://www.impul.co.jp/product...A.htm

Post by **gr81** » Wed Aug 16, 2006 5:06 am

Thanks for sharing, I looked to see if there was a US site and found it. I does have a couple of the parts you listed on the Impul-usa site for the Versa.

http://www.impul-usa.com/impul....html

Just turn the page a couple of times.

Post by **bsherman211** » Wed Sep 06, 2006 6:46 pm

http://www.impulusa.com

It's pretty pricey...

Post by **Ever Victorious** » Wed Sep 06, 2006 9:38 pm

(looks at the supercharger)

Great, just what I need, MORE wheelspin.

Post by **audtatious** » Wed Sep 06, 2006 10:09 pm

Bigger tires would cut down the wheelspin. $1400/set for those rims is not bad at all.

Post by **Ever Victorious** » Thu Sep 07, 2006 6:03 am

S'alright, my Versa is already as modded as it ever will be.

Post by **MinisterofDOOM** » Thu Sep 07, 2006 6:05 am

That blower is TINY!

Post by **audtatious** » Thu Sep 07, 2006 9:12 am

Ever Victorious wrote:S'alright, my Versa is already as modded as it ever will be.

For most, stock(ish) is just fine.

Post by **Dano** » Fri Sep 08, 2006 10:45 pm

That kit on a black car looks sexy... im impressed! Needs some bronze Nismo LMGT4s or similar...

-Dan

Post by **JeppAbando** » Sun Sep 10, 2006 8:37 am

are those the base model for the spoiler? a little longer than what i saw before (there was a thread from a super black SL TIIDA ( aussie) and his installed spoiler was shorter)...

and what the spec on those wheels?

Post by **City Connection** » Sun Sep 10, 2006 8:28 pm

Here is some pics of the impul Versa at a local dealer (SoCal)

I believe sticker with all the added parts was about 25k And it was an S too! Love the way dealers always charge 2X retail on added parts!

Post by **bsherman211** » Mon Sep 11, 2006 6:51 pm

Wow! The fit on those wheel arches looks terrible. I wonder if it's an installation problem or if they're poorly built. You wouldn't think so for what they cost.

Post by **bsherman211** » Mon Sep 11, 2006 6:53 pm

As a matter of fact that doesn't even look loke the Impul grill. Wonder if this kit is a knock-off?

Post by **Legacy40k** » Tue Sep 12, 2006 3:12 am

Wow, The Impul parts don't look nearly as good on that car as on the perfect display likely doctored photos from Impul. Nice to see something from the realworld, its amazng the difference angles make.

Post by **BenDupre** » Tue Sep 12, 2006 5:27 am

Looks cheap and cheesy. Lot's o plastic junk.

Ben

Post by **Julz** » Wed Sep 13, 2006 6:11 am

too bad those pads only go with those calipers...I put on aftermarket pads from 97-ish hyundai sonata, they seem to fit just fine with the stock calipers...

that supercharger looks a bit backwards, unless you have an intake manifold with the throttlebody on the opposite side.

I'm still holding off on the muffler bit, after lowering the car, I'm debating about modifying the bumper to accept ( partially ) an after market muffler..It didn't look right just hanging there... I might just hide it behind the bumper at a downward angle...

I wish I had more time to play.....

Post by **dudealex** » Mon Sep 25, 2006 10:07 pm

themadscientist wrote:tuned computer

what does that do??

Post by **MinisterofDOOM** » Mon Sep 25, 2006 10:25 pm

To oversimplify: Factory ECUs are focused on the best balance of fuel economy, emissions, and power. Aftermarket ECUs usually shift the balance in favor of power.

You can change things like variable valve timing and variable ignition timing parameters or compensate for turbo- or supercharging (more air needs more fuel) among other things.

The Impul one is probably designed to work with their supercharger.

Impul parts for Versa (Tiida)

Impul parts for Versa (Tiida)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (gr81)

Re: Impul parts for Versa (bsherman211)

Re: Impul parts for Versa (Ever Victorious)

Re: Impul parts for Versa (audtatious)

Re: Impul parts for Versa (Ever Victorious)

Re: Impul parts for Versa (Ever Victorious)

Re: (240sx2nr95)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (City Connection)

Re: Impul parts for Versa (bsherman211)

Re: Impul parts for Versa (City Connection)

Re: Impul parts for Versa (Legacy40k)

Re: Impul parts for Versa (BenDupre)

Re: Impul parts for Versa (themadscientist)

Re: Impul parts for Versa (dudealex)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums