ignitor chip wiring

[roamaver]

I've searched and searched and cant find any diagrams for where to wire up my ignitor chip. If anyone has any ideas let me know please!!!

[corey240]

what motor is it, and what car is it going into?

[roamaver]

oops hahah, its a s13 blacktop going into a 91 240sx

[corey240]

try this one, http://www.frsport.com/SR20DET....html

[roamaver]

Hmm, that didnt seem to mention anyhting about the ignitor chip.

[corey240]

go to heavythrottle.com and go to the sr install faq at the left side. it says it on there about the ignitor

[ILikeMy240sx]

your ignitor chip goes to a plug by the hole that routes the main harness to the ECU. the other end of the chip goes to the ignition harness.

Just find a plug with 5 pins.. I think there is only one plug that will fit your ignitor. The other side I think has 4 pins...(your ignition harness)

[donmada]

i got the q 45 ignitor and the plugs are on the ignitor but i got different color wires from the plugs to the harness need detailed diagram heavythrottle just shows 2 square blocks did you find anything yet roamaver

[leroiboy]

just to chime in, i like my240sx is correct on this on. i just did mine and there are only those two 4pin and 5pin plugs that will fit. didnt pay attention to wiring color but inside of plugs are orange...