Ignition switch/assembly removal/repair 94 G20

[tatmoof]

I found this thread on the 240SX discussion forum, but cannot seem to find anything that pertains to the G20

I have a 1994 G20 that I managed to break the key off in yesterday. Here is what I posted on the other forum, but no help has yet been offered. Most likely because it is in the wrong place? This is the first time I have done this on a discussion forum so I am pretty clueless. Sorry.....

"except for the key slot, this assembly looks a lot like the switch for my 1994 G20. I broke the danged key off inside the switch and now need to remove the whole unit and replace it (at least I think I do). I have gotten as far as removing the covers and can see that the switch/lock assembly looks identical (cept for the key slot) to mine.Same procedure to remove and install?

The only thing I think might be different is that the small screw that hold the electronics (the 5 soldered wires at the opposite end of the key slot) appears to be of a torx type?

Thanks for the great pics and descriptions. Just want to know if I should be looking for anything different as I tear this thing out tomorrow."

If anyone can lend some assistance I would greatly appreciate it.

tat