Ignition coil or box for my 240

[nismostreetracer]

Need to know if I can add a ignition box or coil to my OEM distributor to my 95 240 and how difficult it would be to connect one. Any recommendations appreciated. :thumbup

[240nismo]

it's really easy, go to jacobselectronics.com and they have a question and answer section that should answer all your questions, im not trying to plug jacob's but thats what I have. You could also check out MSDignition.com , or nology.com. Hope that helps.

[96_S14_SE]

You should brush up on your vorious s-chassis differences 240nismo.. Not trying to be an *** but its not all that easy seeing as how the coil is in the distro for the 95-98 models....

It can and has been done with msd products, allthough I am not sure of any on this board.. It does require a little hacking here and there but nothing major by anymeans IIRC...

[silviaNE]

Its not that hard, if you are going to run a msd 6 seris box, you will be looking at 6 wires all together, 4 of wich go to the coil. 2 wires from oe coil connections to box, then 2 wires from box to oe coil.