idle speed drops and car diez out....need help!!!!!!

[driftsiidwayz]

ok guyz.....im sure alot of people iz new to this site...coz i knoe i am....well ani how....i have a 1995 nissan 240sx SE....i bought it awhile bacc...and know i finallie want to drive it....i notice that my car seems to die down at time.....idle haz gone week and it would die down...........so i changed the distributor rotor...and it would beeh aiite...then tha next dayit happen again...so i changed the knock sensor....which i knew had to beeh replaced..."coz of tha ob scanner...."...ani how....so then all of the sudden my temp gauge went dumb on meeh....everitiime tha temp gauge needle iz on halfway...then tha car iz fine...buh then after awhiile tha needle would drop where tha low temp mark is at...then thatz where mah car starts to jerk and die down....and most of the tiime shuts off....now mah car iz laggin'.....hesitatin'.......please!!!!ani one help meeh out....oh yeh mah checc engine light is on also.....and i knoe that i need mah o2 sensor changed.....buh havent gotten to it yet.....please help meeh!!!!!! oh yeh i forgot to mention that mah number 2 cylinder is mis firing....buh i dont knoe about now....since i placed tha new knocc sensor and tha sprk wire seemz to beeh ok.....what should i do?.....thanx againi also think it might beeh mah throttle position sensor....

Modified by driftsiidwayz at 1:40 PM 2/1/2007
Modified by driftsiidwayz at 7:08 PM 2/1/2007

[nzmoman]

Welcome to NICO.

Just for future reference you should be sure to search for answers to your questions carefully before posting. I think you will find that there is a ton of great information and write ups here at your disposal. Also, for the most part, we like to keep everything in understandable text, and not bolded. It makes your post become an eyesore and nobody will read the whole thing. then you wont get your answers

You should search for a factory service manual to download. be sure to check your IACV, your spark plugs, and wires. Replace your O2 sensor. All of the procedures should be in the FSM. If the problems continue come back and let us know what is going on.

[driftsiidwayz]

i fixed the problems already thank you............=)