getting it closer to running again, got the tranny in, intake manifold on, hlsd coming, piping coming for intercooler and bov set up, injectors coming fuel pump and waste gate coming, and dump tube, turbo lines are on their way, full race is working on a down pipe , got an aem AFRG, and fuel rail is coming too.

just need a tune, head lights + some random parts

looking forward to seeing your chart when finished... and some pictures

badbob2121 wrote:looking forward to seeing your chart when finished... and some pictures

well i am not positive on when i will have a chart, but here is the most recent picture mega intakepipe, turbo should be louder then the engine lol

well didnt do much, cept make a bigger hole for my intake pipe to go through, waiting for the rest of my intercooler piping to come so i can figure that out, but i figured where i want the bov mounted,so got all the stuff together to take in and get welded tomorrow

got head lights and corners on there way now, and going send my ecu out for its tune also

idahotuner wrote:got head lights and corners on there way now, and going send my ecu out for its tune also

Jim Wolf?

No Enthalpy reflash. Getting a dual tune though. So race fuel and pump. Got to see what race fuel I can get my hands on.

But taking some stuff to get welded today. I will have pics up later. But finishing up the touches on my hot pipe and turbo intake pipe.

my intercooler piping i have figured out for my hot pipe, going have it weled so its two sections with one straight coupler. and for your viewing pleasure lol and i am not high haha just smirking cause my mom is in the back ground haha

and test mounted the waste gate and dump tube it will dump out right under the drivers feet lol you feeling those good vibrations.
and s15 hlsd came today with output shafts injectors should be here tomorrow

also got my jwt fuel rail yesterday and injector plugs and resistors

second fuel pump and hardwire stuff

differential gasket and seals came today, so i really should be out there installing them. also fuel injectors came, i must say i am disappointed with the JWT fuel rail. its method of connecting to the manifold leave alot to be desired, def not worth what they charge. trying to get the injectors to seat straight and the holes in the rail dont line up with any bolt hole on the manifold. i will make some custom brackets and then get it to work, but kinda sucks

Call them. Ask for Ben. I suggest you ask for his email as well so you can link him to this page.

oh i talked to Ben twice, he just said make new brackets for them.

idahotuner wrote:oh i talked to Ben twice, he just said make new brackets for them.

Does it say anywhere that you will need new brackets? The Greddy style intake manifolds don't change anything about how the fuel rail is mounted, so if it won't fit your manifold, it won't fit a stock one either.

See that's what I told him. But it doesn't. So I will add it to the custom parts I need to make LOL.

which injectors are you running with the jwt rail?

Msd 96 lbs

Well got some more stuff in the mail. Cs clear corner, and clear covers, and cs fuel rail adapter. Head lights should be here tomorrow. Then I will have a s*** ton of wiring ahead of me.

Hard wire both fuel pumps, wire injector plus and resistors, wire in wideband, wire in head lights. But at the same time elk hunting season started yesterday and I am hunting down some bulls I got pics of on my trail cam. So hopefully I get one soon so I can focus on building the car.

well saw a bull moose today but no bull elk,

but i did get my head lights.
and pulled the lenses off them and mocked up the cs clears.

and i sent my ecu out for a tune today. and waiting on my down pipe. now its mostly got to finished figuring out my intercooler piping. and get some things welded and that will be it for parts, then it will be one major puzzle lol

for the hell of it, my tracking info from my head lights crazy huh


SPOKANE, WA
Oct 13, 2011 3:35 AM
Departed FedEx location
MEMPHIS, TN
Oct 13, 2011 1:20 AM
Arrived at FedEx location
MEMPHIS, TN
Oct 12, 2011 7:56 PM
Departed FedEx location
OAKLAND, CA
Oct 12, 2011 8:05 AM
In transit
OAKLAND, CA
Oct 11, 2011 9:42 PM
Arrived at FedEx location
OAKLAND, CA
Oct 11, 2011 4:35 PM
Departed FedEx location
ANCHORAGE, AK
Oct 10, 2011 2:15 PM
International shipment release
ANCHORAGE, AK
Oct 10, 2011 2:05 PM
In transit
ANCHORAGE, AK
Oct 10, 2011 12:40 PM
Arrived at FedEx location
ANCHORAGE, AK
Oct 10, 2011 7:06 PM
In transit
CHEK LAP KOK HK
Oct 9, 2011 10:05 PM
In transit
TA YUAN HSIANG TW
Oct 7, 2011 2:23 PM
In transit
BAYAN LEPAS MY
Oct 7, 2011 6:32 AM
In transit
SAMUTPRAKARN TH
Oct 7, 2011 5:39 AM
In transit
SAMUTPRAKARN TH
Oct 7, 2011 3:26 AM
At local FedEx facility
SAMUTPRAKARN TH
Oct 6, 2011 6:50 PM
Left FedEx origin facility
SAMUTPRAKARN TH
Oct 6, 2011 5:17 PM
Picked up
SAMUTPRAKARN TH

Holy crap, that's a long list. Thailand huh?

Yeah. Got a good deal on them and they were in great shape. I have actually bought a few sets of bricks from Thailand

This is awesome!

Thanks. I just really want to kill something so I can get back to work on it

positron1 wrote:This is awesome!

I know what you mean!

well working on wiring in my fuel pumps, so far ran almost 45 ft of new wire. crazy. got some sheet metal to make fuel rail brackets also, just need to track down a fender liner to make a cover for my air filter. dropped stuff off to be welded today too

everything is looking great, awesome work!