Idaho Tuner's 240/|SR Build thread

[White Comet]

lol i like how duffman's 1 gauge is close to him but my 1 gauge is in the farthest away spot

[idahotuner]

so i think i got my suspension figured out

PBM coiloversPBM RUCASsuspesnion tech sway barsES bushingstanabea strut bars.

plus the stuff i allready have

[White Comet]

I'm white comet and i approve that suspension

[idahotuner]

haha. awesome. i might actually change my strut bars to greddy ones. but yea. that set up wont be extremely expensive. but it will still work great.

[codyace]

so i think i got my suspension figured out

PBM coiloversPBM RUCASsuspesnion tech sway barsES bushingstanabea strut bars.

plus the stuff i allready have

What coilovers?Get SPL RUCA's (or Battle Version)Good sway barsBushing kit is niceSkip on the baller strut brace, and get one from Courtesy Nissan.

Then invest in new front tension arms.

[idahotuner]

http://www.gtfactory.jp/cms/e1...t.php the link to the company PMB.

i am thinking greddy strut braces now.

what is the need for frotn tension arms.

i have Tein front tie rods inner and outer all ready

[idahotuner]

ok where doe this ground go. i think it came of the intake side. but i am not sure. help would be great

ok i think the black wheels look nice. s othe yare the ones i will most likely go with.

they will go better with black then the gold ones

so what is that ground FOR PLEASE HELP

[Didderson]

ok where doe this ground go. i think it came of the intake side. but i am not sure. help would be great

so what is that ground FOR PLEASE HELP

Yayy I can halp! It's from the back of the motor near the exhaust side but still on the very back of the head just above the trans. It's just a cheap-o firewall to engine ground. throw that sheit out and get a nice thick wire with some baller plated terminals in its place.

[idahotuner]

hey thanks. tom.

it was one of those things i should have taken a picture of before i diconected, but i didny. well i guess i will probly replace it.

[FastasEF]

Subscribing to follow.

[codyace]

i am thinking greddy strut braces now.

http://www.courtesyparts.com

Get their bar. Easy done, 40 bucks (or whatever)

what is the need for frotn tension arms.

Lowered/coilovered cars raise hell on the factory ones, and bust the green goo out of them.

i have Tein front tie rods inner and outer all ready

That's a great start

[2LO4URHO]

Nice wheels Idaho I like. I thought about getting my centers painted black this summer.

[White Comet]

just to be clear u didnt buy those wheels yet did u? it looks like the pics on phase2's site but i could be wrong, i was gonna tell u what that ground was but tom beat me to it

[idahotuner]

Subscribing to follow.

did you read up. casue the build is half over.

http://www.courtesyparts.com

Get their bar. Easy done, 40 bucks (or whatever)

Lowered/coilovered cars raise hell on the factory ones, and bust the green goo out of them.

That's a great start

ok i that is why i am getting the RUCAS as well

Nice wheels Idaho I like. I thought about getting my centers painted black this summer.

yes i am looking at those two and deciding bewteenn them. most likely the balck ones

just to be clear u didnt buy those wheels yet did u? it looks like the pics on phase2's site but i could be wrong, i was gonna tell u what that ground was but tom beat me to it

those are the pics from phase2

and no i havent bought them yet. i will do it in march or april

[idahotuner]

Subscribing to follow.

'

hey josh how do you like how your old car is turning out?

[White Comet]

ok thats what i though about the wheels

[idahotuner]

yeap. so my dad and i need to get cracking o nthe body work.

i think my mom is gettign em an ebay intercooler for xmas, and my dad is gettign me a radiator. s oall iwill need it my injectors and tune and intercooler piping, and i cant start my car.

[White Comet]

sounds good, nice to see its getting wrapped up

[idahotuner]

lol opps i ment i can start my car. haha

yea. i really cant wait tell it gets painted. i think i am going to try to get some 32 skyline seats. and have them reapolstered black. for my seats.

i just need my suspension stuff. and lsd. and interior stuff .that is it. haha my build is HALF OVER right now

[FastasEF]

Yeah, I read up on all the other pages to see the progress.

Everything looks good as of yet.

Hey, if you get another intercooler and piping i'll buy back the i/c and piping that was on there from ya' if you don't have someone already lined up.

[codyace]

Idaho: here are some pics of the factory jobbers that I busted all up, and the SPL replacements:

[idahotuner]

Yeah, I read up on all the other pages to see the progress.

Everything looks good as of yet.

Hey, if you get another intercooler and piping i'll buy back the i/c and piping that was on there from ya' if you don't have someone already lined up.

yea i sold the intercooler and piping to a guy on here. tom- he has the white elephant build thread. i do have the BOV still. casue i am plannig on a hks SSQ

[idahotuner]

hey thanks cody. i will replace those. and i think i will makea fs thread for my FPR

[White Comet]

yep the ic got in a few days ago he said it look pretty good

[codyace]

yea i sold the intercooler and piping to a guy on here. tom- he has the white elephant build thread. i do have the BOV still. casue i am plannig on a hks SSQ

Just ensure you recirculate it, and you'll be set

[idahotuner]

well i am going to have it located on my cold pipe. so i wont be recirculating it. from what i have read. you can have them tune your ecu for a atomoshepere release

[FastasEF]

How much do you want for the BOV?

(It feels weird buying parts I bought back, lol).
Modified by FastasEF at 2:35 PM 12/31/2007

[idahotuner]

lol. i dont know 30 shipped sound good?

[idahotuner]

HEY Hijacker, or any other mod, could you move this thread to the 240 scetion and rename it Idahotuners build thread

[s14tan]

Damn Ben you been been busy..Lookin damn good too.