Idaho Tuner's 240/|SR Build thread

[idahotuner]

I hate not having nice interior in a car. also its not good to have a car sitting in primer. Primer is like skin and porous allowing moisture to soak through. Id get it painted asap, or maybe this is just my excuse in trying to get you get it done so I can enjoy it

if i had ps and stuff i would be more keen on making the interior nicer. but i like the ruggedness with the back stripped and just seats and racing harnesses in it. just the essentials. i really wantot go track it or find some where to drift. but the track isnt open and wont be open.

the primer deal is true. that is why its called primer lol. it gets the car ready for paint.

lol and right now the only money i am spending on my car is for gas. the rest i have to save for college this fall. Universities dont let you go to them for cheep lol

[sbird1]

I heard that. I think I'm selling my bike for school money and 240 money.

[idahotuner]

i really wantot geta 2 step launch control. it would be sick. i hope scott can program one in for me.

[RCCC_DRiFteR]

i really wantot geta 2 step launch control. it would be sick. i hope scott can program one in for me.

ok, I never understodd what exactly is a 2 step!? could you plz inform Idaho??

[Kalypso]

^ I dont know what it is either, but its all the rage with the kids these days.

Interior is a must. and the girls like it.

[idahotuner]

2 step is a revlimitor that kicks in when you have the clutch pushed in and will only allow you to rev to a certian rpm. which alows you to build boost beforea launhc and keep the pedal floor while shifting

[Kalypso]

hm.. cool

you should start a 400hp club thread.

and get everyone with 400+ to post specs, engine bay pics.

[idahotuner]

thatsa good idea. shoudl i do it in the general section so any one cna post in it or should i do it in the 240 section

[RCCC_DRiFteR]

2 step is a revlimitor that kicks in when you have the clutch pushed in and will only allow you to rev to a certian rpm. which alows you to build boost beforea launhc and keep the pedal floor while shifting

kinda sounds like a stutter box...

thatsa good idea. shoudl i do it in the general section so any one cna post in it or should i do it in the 240 section

do it in the main 240sx section

[idahotuner]

i actually wont be able to afford a Bee R Rev limitor tell the end of the month. unless i sell some car parts. lol

[RCCC_DRiFteR]

ok, so its for straight line shot!! I see now, build the boost before you even start movin!!

[idahotuner]

exactly and the bee r rev limitor only custs spark so you get kick *** flames shotting out your exhuast when your at stop lights mashing on it haha.

[pflicht]

exactly and the bee r rev limitor only custs spark so you get kick *** flames shotting out your exhuast when your at stop lights mashing on it haha.

F*CK YEAH! Melt these rice a$$ b*tchez bumpers!!! HAHA!@!!

[idahotuner]

haha yeha. i guess last tiem we were running around my budy said i shifted and hada huge flame shoot out the back i was liek kick asss haha

[RCCC_DRiFteR]

how much does it go for?? the Bee R?

[silvia_ks_69]

if u have to ask...you cant afford it...

[silvia_ks_69]

250.00 shipped to me in canada on rhdjapan.com so put in ur info and find out how much. thats my spoon feeding for the night...but on a more serious note, think i might pick one of these bad boys up, two fittty seems worth it to save ur engine if u mis shift or something dumb.

[idahotuner]

did a boost leak test tonight and found like 5 leaks one is off the turbo and the other is a hole in my cold pipe were it rubbed through. so i need to figure out a way to fix the pipe and make it not happen again but it is running good minus that. and my fricken catch can isnt working

[Kalypso]

I want to make a catch can, like the box type you see in front of some SR's

[datsun2401972]

What did your boost leak test consist of? Did you just spray soapy water on the plumbing while the engine was running?

[RCCC_DRiFteR]

250.00 shipped to me in canada on rhdjapan.com so put in ur info and find out how much. thats my spoon feeding for the night...but on a more serious note, think i might pick one of these bad boys up, two fittty seems worth it to save ur engine if u mis shift or something dumb.

wow, assumptions. . .you think im livin on welfare or something!? or you know maybe I've just number looked into one cause my main car hobby doesnt involve a straight line. . . .just my 2 cents for the night...

[mRodiek]

WOWWW amazing thread dudetook me about a week to read through the entire thing between work & my carw/o goin lame i gotta say you gave me a lot more confidence in myself in doin the SR swap & building it- i finally have enough $ for an S13 & im goin 2 start saving for a motor nowGREAT THREAD! cant wait to see it paintED!

[Taylor008]

I just read pages 3-7. And I feel like I'm going to die of reading. Your car is awesome idaho. I saw your video's on youtube, very cool!

[idahotuner]

What did your boost leak test consist of? Did you just spray soapy water on the plumbing while the engine was running?

just presureized it and where ever air comes out it would whistle.

and my CS catch can doesnt do ****. maybe it is how i have it set up but i think with the turbo suckng as hard as it is and the crank pressure being so high the stuff isnt being able to drop in the catch can. and is getting sucked right back through into my intake pipe and turbo.

WOWWW amazing thread dudetook me about a week to read through the entire thing between work & my carw/o goin lame i gotta say you gave me a lot more confidence in myself in doin the SR swap & building it- i finally have enough $ for an S13 & im goin 2 start saving for a motor nowGREAT THREAD! cant wait to see it paintED!

the stuff takes time man, i read throguh tons of build threads before i even began mine. and even after i started i read other threads. and actually haveing your own build htread cn hep you. because i was able to go back and figure out my cams were positioned wrong and fix it.

I just read pages 3-7. And I feel like I'm going to die of reading. Your car is awesome idaho. I saw your video's on youtube, very cool!

i have alot more videos and pics i need to load i have just been lazy and busy lol. but this weekend i got some good burn outs

[JRPS13]

just presureized it and where ever air comes out it would whistle.

please elaborate!!!

[ryan15]

Hey Idaho I know this is random, but if you decide to do flat black for temporary. spend 50 bucks on a real basecoat, so when you do decide to spray your car your not sprayign over some weak rattle can laquer crap, but im sure your dad would save you from makign that mistake.

Ryan

[Slideways^Jordan]

i have alot more videos and pics i need to load i have just been lazy and busy lol. but this weekend i got some good burn outs

SHIP man quit being lazy and get them videos uploaded lol.. jk but really upload them i want to see em.

Im working on my car all day tomorrow getting it preped to be takin off the jackstands that my car has been sitting on for over a year now. LOL

[idahotuner]

please elaborate!!!

i will takea picture later of the item my budy made to do it. but basically it is a capped off pipe that you stick i na coupler right off the turbo inlet. then motor is turn off. and using compressed air you pressurize the whole system through nipple en the end of the pipe. couplers will put off a whistling sound when air leaks out around them. i acutally founda boost leak coming off my turbo. that i need to maeka gasket for to fix and found i had a hole in my cold pipe. thos are some reasons my car has ran liek crap lately. well at least at idle.

[idahotuner]

here are some pics.

[silvia_ks_69]

wow, assumptions. . .you think im livin on welfare or something!? or you know maybe I've just number looked into one cause my main car hobby doesnt involve a straight line. . . .just my 2 cents for the night...

lol k, great? mine isnt either, u asked, i told. simple as that