Idaho Tuner's 240/|SR Build thread

Post by **idahotuner** » Fri May 23, 2008 5:53 pm

^ heavythrottle hooked me up with rotors, pads, and ss lines.you can get them from phase2 as well

Post by **White Comet** » Sat May 24, 2008 2:29 am

idahotuner wrote: yeah i need only one. please and thank you

email me your address and i'll send it out

Post by **Slideways^Jordan** » Sat May 24, 2008 8:04 pm

Nice Brakes Ben!!

Post by **Kalypso** » Sun May 25, 2008 1:12 pm

so what i am seeing is,

its a good Idea to remove the shield that covers the back of the rotor...

unless I want protection from dust dirt and grime

Post by **pflicht** » Sun May 25, 2008 2:28 pm

Wow, a few days of being gone and I have missed an assload! Lookin good Ben. When is the new windshield molding supposed to come in? And those brakes look hawt

Post by **White Comet** » Sun May 25, 2008 4:43 pm

Kalypso123 wrote:so what i am seeing is,

its a good Idea to remove the shield that covers the back of the rotor...

unless I want protection from dust dirt and grime

bigger rotors wont clear the shield. mine are gone too

Post by **ThuG LyFe** » Sun May 25, 2008 5:55 pm

sweet i can't wait for the final product man

keep the updates coming

Post by **idahotuner** » Mon May 26, 2008 4:55 pm

White Comet wrote:email me your address and i'll send it out

i sent you it.

Slideways^Jordan wrote:Nice Brakes Ben!!

thanks man i think they are pretty. cant wait for new ones on the back.

Kalypso123 wrote:so what i am seeing is,

its a good Idea to remove the shield that covers the back of the rotor...

unless I want protection from dust dirt and grime

White Comet wrote:bigger rotors wont clear the shield. mine are gone too

thanks WC

ThuG LyFe wrote:sweet i can't wait for the final product man

keep the updates coming

yeah this week i should get alot done hopefully.

pflicht wrote:Wow, a few days of being gone and I have missed an assload! Lookin good Ben. When is the new windshield molding supposed to come in? And those brakes look hawt

the molding will be here thursday probably.

Post by **Kalypso** » Mon May 26, 2008 11:54 pm

White Comet wrote:bigger rotors wont clear the shield. mine are gone too

hey ben, im trying to turn it over but no dice. when you get a moment read it over and offer your symphathies. zerothread/339676

Post by **idahotuner** » Tue May 27, 2008 1:52 pm

i commented but dont really know waht to tell ya.

Post by **DJButton** » Tue May 27, 2008 4:00 pm

Looks nice man. Out of all the new punk kids on here, your car is coming along the best, pretty serious build, grats.

Post by **idahotuner** » Tue May 27, 2008 4:24 pm

^ thanks alot man. i appreciate comments like that. nothing like a good old moral booster.

and talking about boosters i reused my stock one but swapped out my BMC today in favor of a z31 BMC to complement my brakes. i think out of all the upgrades i did on the car the brakes have been the easiest. i just need to bleed the lines now and we are good.

Post by **DJButton** » Tue May 27, 2008 4:28 pm

Werd, brakes are very important!

Post by **Kalypso** » Tue May 27, 2008 6:49 pm

DJButton wrote:Looks nice man. Out of all the new punk kids on here, your car is coming along the best, pretty serious build, grats.

indeed it looks excellent i was browsing youtube videos of sr20's and yours came up, I smiled because I knew who that was.

dont sweat it, Its an obstacle that wont get away from me.

It will start and it will drive... very fast.

Post by **idahotuner** » Tue May 27, 2008 7:03 pm

got my Z31 BMC mounted

and got the vaccum sensor installed for my Apexi AVC-r

my dad got the passenger side rocker panel fixed

and i did some more sanding on the front bumper. i just have to do some hand sanding now in the corners and stuff.

junk that has been replaced on my car.

passenger side wheel well that i sealled up using a peice of plastic and rtv sealant stuff.turned out great.

an everything mounted for good in my engine bay now.so that is the finished product.

until i get a torque dampener and strut bar.

Post by **sbird1** » Tue May 27, 2008 7:57 pm

Looks awesome man. Way to go! Man, I really want to see it in person and especially ride in it! Lookin awesome. Will definately be badass once paint has been laid.

Post by **idahotuner** » Tue May 27, 2008 8:03 pm

yeah paint is going to be HOT. i say 3 weeks tell paint. would be sooner but i have a grad to go to saturday. and then next sunday i have my sisters grad. so i got this friday, this sunday next friday. are the main full days i will have to put into it. should get alot of final stuff nocked out then.

my dad orders a 3 piston air compressor today and is getting a new paint gun for doing my car. we are getting the air compressor for free. 600 dollar one. buying it using points from his credit card.

Post by **Slideways^Jordan** » Tue May 27, 2008 8:26 pm

idahotuner wrote:yeah paint is going to be HOT. i say 3 weeks tell paint. would be sooner but i have a grad to go to saturday. and then next sunday i have my sisters grad. so i got this friday, this sunday next friday. are the main full days i will have to put into it. should get alot of final stuff nocked out then.

my dad orders a 3 piston air compressor today and is getting a new paint gun for doing my car. we are getting the air compressor for free. 600 dollar one. buying it using points from his credit card.

sweet i love free stuff espeically when their tools.

hey ben i have question for you if if you happend to what it is.

now when you change out the container bottle on the BMC resivoir bottle how do get it off the BMC?

Post by **idahotuner** » Tue May 27, 2008 8:36 pm

its on there pretty good. i would put it in a vise and just pull on the reisvor. it is only held inplace with 2 little rubber rings..

when i assembled my new one i just popped it in. so the old one should just pop out of the BMC

Post by **Kckouki** » Tue May 27, 2008 8:48 pm

Fail for not being finished by now. lol

J/p, looks good, I wanna see this ***** done.

Post by **Slideways^Jordan** » Tue May 27, 2008 8:49 pm

idahotuner wrote:its on there pretty good. i would put it in a vise and just pull on the reisvor. it is only held inplace with 2 little rubber rings..

when i assembled my new one i just popped it in. so the old one should just pop out of the BMC

Thats what i figured Thanks Ben.

Post by **idahotuner** » Tue May 27, 2008 8:55 pm

Kckouki wrote:Fail for not being finished by now. lol

J/p, looks good, I wanna see this ***** done.

you and me both. give it 3 weeks and it should be.

Slideways^Jordan wrote:
Thats what i figured Thanks Ben.

no problem man.

Post by **codyace** » Tue May 27, 2008 8:58 pm

That Master Cylinder looks great!

Post by **idahotuner** » Wed May 28, 2008 6:37 am

codyace wrote:That Master Cylinder looks great!

yeah! adds even more color to the engine bay. and i lik e color.

Post by **codyace** » Wed May 28, 2008 1:14 pm

idahotuner wrote:
yeah! adds even more color to the engine bay. and i lik e color.

I'll be hoenst, it's almost making me go out and get a new cap and reservoir too!

Post by **idahotuner** » Wed May 28, 2008 1:24 pm

yeha its sweet. pretty much everything that you can see there on top of my motor is either new or aftermarket.

Post by **tokendog** » Thu May 29, 2008 6:51 am

You car is....I lack words. I bow to thee.

Post by **idahotuner** » Thu May 29, 2008 6:58 am

tokendog wrote:You car is....I lack words. I bow to thee.

haha thanks man. are you going to get yours running pretty soon? oh and i got those pics for you.

Post by **Slideways^Jordan** » Thu May 29, 2008 9:15 pm

Hey ben check out my update on this link.

http://www.raygoldmodels.com

Post by **duffman1278** » Thu May 29, 2008 9:23 pm

Slideways^Jordan wrote:Hey ben check out my update on this link.

http://www.raygoldmodels.com

I hate you!!! lol but its a good song

Idaho Tuner's 240/|SR Build thread

Re: (cmoody2006)

Re: (idahotuner)

Re: (Slideways^Jordan)

Re: (idahotuner)

Re: (Kalypso123)

Re: (ThuG LyFe)

Re: (White Comet)

Re: (Kalypso123)

Re: (idahotuner)

Re: (idahotuner)

Re: (idahotuner)

Re: (DJButton)

Re: (Kalypso123)

Re: (idahotuner)

Re: (sbird1)

Re: (idahotuner)

Re: (Slideways^Jordan)

Re: (idahotuner)

Re: (Slideways^Jordan)

Re: (codyace)

Re: (idahotuner)

Re: (codyace)

Re: (idahotuner)

Re: (tokendog)

Re: (Slideways^Jordan)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums