IAP manifold and Tial 35mm wastegate fitment

[koukiKA240]

Its pretty simple i guess. I cant seem to figure out the way to mount the wastegate to the manifold and have enough room. Does the side of the wastegate with the front part of the valve go on the manifold side?? Or does the side with the back part of the valve go towards the manifold??~Sam

[:: orion ::]

EDIT: I had it wrong, don;t know what I was posting...

I fixed the text below:

The "bell" part with the vacuum/boost nipples is the top, and the outlet is the side.

The "bottom" is the "in"...it also has the extra metal ring that seals against the plunger.

(Like the pic below...)
Modified by :: orion :: at 6:24 PM 9/20/2004

[skatanic28]

so is this not right? not my car, but what im getting....

[koukiKA240]

I have no idea

I think im gonna have some fitment issues with my wastegat. YAY another problem.~Sam

[daniel240]

yea thats right. it looks like it fits fine in the pic. and the wastege is angled good so the dump is in the same direction as the downpipe will be.

[skatanic28]

yea thats right. it looks like it fits fine in the pic. and the wastege is angled good so the dump is in the same direction as the downpipe will be.

alrite cool, thanks.

[:: orion ::]

The pic is correct...I posted bad info above...sorry.