I took it off.. now what?

[nieko]

zerothread?id=254138

i started that thread awhile back, well i removed it all, but i dont know what to do with the skinny little pipe that was going into the exhaust? idk here ill show you guys a picture basicly its makes a loud annoying noise because its such a small whole that exhaust is coming out of... please help!





really hard to get a good angle but do what you can please..

[n240sxfnatic]

get some welding epoxy 2600 psi when dried, and fill that end up and let dry for 12-24 hours ghetto-fab

[nieko]

bump for better idea pleeeease lol

[nieko]

cuz i took off the whole box and like everything connected to it. and the was left over and i dont know what to do with it... any suggestions? pleeease bump bump bump

[surfer240sx]

search egr removal?

[FSUDrifter]

go to an exhaust shop and they can weld over the hole in like 2 minutes, prob charge $30.

wait is that the thing you can just plug?

[lrb_2000]

you're just talking about the little pipe that goes back into the exhaust right? .. .just cut it short, stick a NICKEL in there, you know like $0.05 piece, lol.. then screw it back in. it will never leak. or clamp the little pipe left over shut, and weld it.I can get a better picture maybe if you need.

[lrb_2000]

search egr removal?

that's not the egr.

[nieko]

i love you ahahah so just unscrew it put a nickel in screw it back on and walla?

[lrb_2000]

yep.. i'd cut the pipe really short too, so it's easier to work with, and doesn't look like poopy..

[nieko]

you know when u cut the pipe you could actually side the little bold thing over it so there is no pipe. its unnecessary but wow thank you for the help, no more annoying noise, much better