I swear I searched... (Dashboard Removal)

A General Discussion forum for cars and other topics, and a great place to introduce yourself if you are new to NICO!
User avatar
Jesda
Posts: 39644
Joined: Mon May 05, 2003 1:50 pm
Location: STL, DTW
Contact:

Post

The Infiniti Articles section is down and I'm trying to refresh an old link at q45.org. Does anyone have the steps for complete dashboard removal on a G50? Did anyone save the post in the Articles section?


User avatar
elwesso
Posts: 30810
Joined: Sun Feb 23, 2003 4:52 pm
Car: 94 Infiniti Q45t 5 spd
2007 BMW M Coupe
2007 Infiniti G35 S 6MT
Location: Indiana
Contact:

Post

I would assume you just want the dash panels... There are instructions in the BF section of the FSM...

Ill try and remember as much as I can

-Remove shifter bezel (pull on the back)-Remove screws around shifter-remove ash tray-Dash piece around HU should now be free

R-emove lower screws to upper dash piece (I think thers like 6 total.. 3 on the right hand side of the wheel and 3 on the left hand side).. Remove the 3 switch panel with the cruise, mic, and outside window adjustments to gain access to the left screws..-Remove upper screws near instrument cluster-Position steering wheel all the way down and all the way foreward. on some ive had luck by removing the plastic cladding around the steering wheels, which is held on by 2 screws on the side, and one screw on the bottom... -From there, it should simply pull out...


Return to “General Chat”