I need your pics (CA18DE)

[Pulsar-nx-kid]

I,m looking for pics of as much of the timing side of the motor as possible!I was dumb and did my timing belt with out bagging and tagging the bolts,so more or less i gotta see what 3 bolts go to the CAS and the rest of that side of the motor i already got the allen bolts in and the bottom part of the timing cover as well but i still have allot of bolts to go so any pis you could either send me or post up on this thread would be much appreciated! Even if you can tell me if the 3 crank angle sensor bolts have one or two washers that would also be a big help! Thanks

[Pulsar-nx-kid]

Thanks for nothing guys! I found a better forum for my pulsar and i won't waist your or my time here any more! Again I appreciate all the help i didn't get here! Peace! And newcomers don't waist your time if you have a NX cause you will get the response's long after you figure it out your self!

[06_blkout]

The CA isn't exactly the most common engine around here, and not everyone checks the forum every single day, so be patient before posting another post like the second one in this thread.

Here. http://www.nicoclub.com/FSM/Pulsar/1989 ... 89_FSM.pdf ....Page 147 should get you started. That FSM should answer every question about your car.