I need to borrow an HKS 264 cam...

Post by **float_6969** » Wed May 11, 2005 4:03 am

Or at least get some specs so that I can get mine reground. Maybe somebody with cams can let me borrow them so that I can get them copied? I've talked to the guy at COLT cams, and he's quite sure that he can make a regrind of that cam for about half the price of new. I just need to borrow one so that he can duplicate it. If anybody can help me out, I would greatly appreciate it!

Post by **WeldingHank** » Wed May 11, 2005 10:10 am

i hope someone does this, cus i'd buy a set of copies too.

Post by **DjLiquid** » Wed May 11, 2005 11:01 am

Post by **niscort** » Wed May 11, 2005 1:43 pm

arent new tomei's pretty cheap from places like greenline.jp?

I actually know of a set of brand new unused 260's 8.8mm forsale for $463.80us in Aus. I can put you onto them if interested.

Post by **cortina-mk1** » Wed May 11, 2005 6:01 pm

yes niscort i to know of the ones you speak of

Post by **Looneybomber** » Wed May 11, 2005 6:47 pm

Hey float. What about 264's but with 9.0mm of lift That sucker would scream!

Post by **float_6969** » Wed May 11, 2005 7:10 pm

Those are the specs of the HKS cams IIRC. But I need to know some other things about the cams that I can't seem to find anywhere.

Post by **biosehnsucht** » Wed May 11, 2005 7:35 pm

good quality clones for less than the cost of originals would own..

but when I get new cams I'm going to go solid lifters.. if ever haha

Post by **float_6969** » Fri May 13, 2005 1:35 am

TMS, think you can help me out?

Post by **float_6969** » Fri May 13, 2005 1:37 am

niscort wrote:arent new tomei's pretty cheap from places like greenline.jp?

I actually know of a set of brand new unused 260's 8.8mm forsale for $463.80us in Aus. I can put you onto them if interested.

If they're still around next week, I might be intrested. I'm TRYING to buy a used LM-1 this week, so I don't have quite that much extra. This may fall through though as I haven't heard back from the guy in a couple of days. He must not be as anxious to sell it as he says...

Post by **niscort** » Fri May 13, 2005 2:17 pm

No worries, I have read he was waiting for a deposit to be put into his account, but I can find out for sure if you would like. I am actually also in posession of a hks 264 exhaust cam... but international frieght may make it somewhat an expensive exercise.. although if you want to look into it.. feel free

Post by **float_6969** » Fri May 13, 2005 7:03 pm

Yea, the shipping would be killer on it. I just thought I'd put the word out that I was looking for one. I'm somewhat patient

Post by **float_6969** » Mon May 23, 2005 4:16 am

TTT, I only need one! I'd give it back, I promise.

Also, niscort has showed me a single, damaged, Tomi 260deg 9.25mm on the yahoo auctions. Does anyone know if that lift will still clear the head without modifications? The HKS is 264deg, but it's only 9.0mm of lift. This is not only for me, but for you guys, so talk to me and tell me what you want.

Post by **Not_a_sr** » Mon May 23, 2005 9:20 am

float i can probably get you a deal on a new wideband. i have a few of the new invoate systems that use the digital gauge, i dont think i have any lm1s laying around.

Post by **float_6969** » Mon May 23, 2005 9:26 am

I'll email you about it...

I need to borrow an HKS 264 cam...

I need to borrow an HKS 264 cam...

Re: I need to borrow an HKS 264 cam... (float_6969)

Re: (niscort)

Re: (niscort)

Re: (float_6969)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums