I need new ball joints

[Konartis]

i was wondering i need new ball joints and i dont feel like buying the whole assembly from nissan i see various things out there.... Has anyone had this problem
i have an 03 350z 109xxx miles on it

[dasoupdude]

They are only sold as an assembly from nissan, but:

http://www.z1auto.com/prodmore.asp?mode ... rodid=3417

[Konartis]

that really sux what about these??

http://www.enjukuracing.com/megan-racin ... 10313.html

[BusyBadger]

That $200 difference represents a significant quality gap between those two parts.

Come to think of it I'm pretty surprised that SPL Parts doesn't have something available. Weird.

[AZ350Z]

I run the Megans and have had no problem. They are advertised as "roll center adjusters" which is BS, they are the same size as stock. For the $$ if your car is only a daily driver, I would go with Megan.

[Konartis]

I run the Megans and have had no problem. They are advertised as "roll center adjusters" which is BS, they are the same size as stock. For the $$ if your car is only a daily driver, I would go with Megan.

thanks my car is 100 percent stock im am going to try them out and post feedback. How many miles do u have on them???

[AZ350Z]

I have about 12k miles on mine and quite a few track days. Holding up fine.

[jasontamu]

Im guessing from your description your talking about the ball joint at the bottom of the front spindle......

If so, its about $60 bucks for a set........u can see info on it here:

Competing Forum Link Removed By Moderator

http://cgi.ebay.com/ebaymotors/2-FRONT- ... _785wt_758

And 1 Ebay Link is almost too much. Two is far too many, removed the extra one.

-J

[Konartis]

sry for the delayed response. but have you used those?? How are they

[mrgrey]

I run the Megans and have had no problem. They are advertised as "roll center adjusters" which is BS, they are the same size as stock. For the $$ if your car is only a daily driver, I would go with Megan.

What suspension set up do you have? I called Megan and they said that it should only be used on aggresively lowered cars.

However, I Don't want to pay $660 for knuckles, So if these work on stock suspension, I am all for it.

[mrgrey]

thanks my car is 100 percent stock im am going to try them out and post feedback. How many miles do u have on them???

What Ball joints did you end up using, Megan or ebay? Do you still have stock suspension?

Thanks