I need help ASAP!!!!

[1sikvert]

Hey everyone, I hope it is okay to post up here. I am making some vinyl stickers for an Altima Coupe that is going to SEMA and I won't be able to actually get my hands on the car until Saturday when I go to put the stickers on. The thing that I need help with is measurements of the car. I need to know the following:

1. How many inches on the front door from under the side view mirror to the bottom of the door.

2. How many inches from the front of the bottom of the front fender to back of the bottom of the fender.

3. How much room on the corners of front and rear bumpers without hitting any openings or obstructions.

4. And how many inches across is the top of the front windshield.

Please post up the measurements or e-mail me: [email protected]. I don't have much to offer in return but I am willing to make a custom sticker of your choice for only the cost to mail it to you or if you are in SoCal we can meet up and I will give it to you. I tried searching all over this site and the internet but turned up with nothing. Any help would be greatly appreciated especially if I can get the measurements tonight so that I can start cutting ASAP. Thanks in advance!

-Tom

[1sikvert]

I got the measurements I needed. Thanks!

[Infantry1327]

Hey everyone, I hope it is okay to post up here. I am making some vinyl stickers for an Altima Coupe that is going to SEMA and I won't be able to actually get my hands on the car until Saturday when I go to put the stickers on. The thing that I need help with is measurements of the car. I need to know the following:

1. How many inches on the front door from under the side view mirror to the bottom of the door.

2. How many inches from the front of the bottom of the front fender to back of the bottom of the fender.

3. How much room on the corners of front and rear bumpers without hitting any openings or obstructions.

4. And how many inches across is the top of the front windshield.

Please post up the measurements or e-mail me: [email protected]. I don't have much to offer in return but I am willing to make a custom sticker of your choice for only the cost to mail it to you or if you are in SoCal we can meet up and I will give it to you. I tried searching all over this site and the internet but turned up with nothing. Any help would be greatly appreciated especially if I can get the measurements tonight so that I can start cutting ASAP. Thanks in advance!

-Tom

These are some ruff numbers, seeing as how I dont know exactly what you are talking about. I would recommend you go to the dealership and measure one of the coupes on the lot. I would assume you need exact measurements for what you are makeing but hear is what I got.

1. 27"

2. going straight across from out side bottom left corner to bottom right corner. It is 39" across from top to bottom(where wheel is but bottom of fender would be if it went straight over wheel. 25" high and the flat side wall on the fender is 3" thick

3. Front bumper right side corner- width= 14.5" height= 19" Rear bumper right side corner- width=9" height= 21.5"

4. 46.5"

There are alot of complex lines on the A/C so knowing exactly what you want is neer imposible, so again I will reccomend you measure yourself because nothing is sqaure

If you cant go to a dealership. Draw some lines on a a/c and point out exactly what lines you want. Only straight lines, so draw a line from start to finish. Then I can put those measurements on there

[Loop]

Sounds like your doing my car