I need an Intercooler

[CA18Fastback]

Hey guys,

I've decided that I dont feel comfortable with the MKIV Supra Core anymore. It will be auctioned off on Ebay. I need a good solid IC that will flow 400hp+ for when I turn it up. I will be running between 325 and 375 daily if all goes well. Any suggestions are greatly appreciated. I am trying to get this done ASAP so used cores are ok if in good shape.

Thanks!-Ian

[USDM_OneVia]

Doesn't the MK. IV Supra intercooler flow like 325 in stock form?

Joe

[CA18Fastback]

yeah, it has been used for 500hp on some DSMs but I just dont like the idea of a 2.5-3.0psi drop in pressure from inlet to out.

-Ian

[CA19DET]

this is the best deals i have come accross yet, if i didnt get my intercooler so rediculously cheap from a friend



Quote »This auction is for one intercooler. This intercooler has a core size of 22"x10"x3" this is a race intercooler, NOT LIKE THE OTHERS ON E BAY. THIS ONE IS 3 INCHES THICK. The complete intercooler measures 30 X 10 X 3 from entank to endtank. It uses a SPEARCO BAR AND PLATE CORE. It is 35% more efficient than the infererior Greddy & HKS tube and fin cores. As you can see in the pictures below all welding is proffesionally done. The recesses on the inlets are CNC machined to provide a more secure surface in which to seat hoses and clamps. This intercooler can flow 475p It has 2.5inch inlets. BOOSTCOOLERS SELLS THE HIGHEST QUALITY INTERCOOLERS ON E-BAY! OUR QUALITY AND SERVICE IS OUTSTANDING! (CHECK OUR FEEDBACK) Normally this product sells for over 875.00 REMEMBER YOU ARE BIDDING ON A NEW PRODUCT. IT HAS NEVER BEEN INSTALLED OR SOLD TO ANYONE BEFORE . GOOD BIDDING. CHECK OUR OTHER AUCTIONS FOR OTHER SIZES. [/quote]BOOSTCOOLERS ON EBAY, he is a powerseller (over 400 satisfied customers)

http://cgi6.ebay.com/ebaymotor...ws=50

Prices range from $330-500

[Nathan]

bad end tank design...good core

[NISMOingen]

Agreed: squared joints, single block monoprogressive endtanks.

But for $400 range....you could do worse

[USDM_OneVia]

What part of cincy/dayton are you from? Jon (slw240sx) is from dayton and I am from cincy! Good to see people from here and not Orlando :rolleyes

JFWY guys....

Joe

[slw240sx]

hes down the street from me joe! tiger auto. thats like down the street, what all do they do there? ive seen two sweet Zs come out of there and dust my *** when i had my auto 240. i have been meaning to go in there and see what they do there just havent had a chance .

[CA19DET]

view his other auctions they have all sorts of sizes and prices

[NISMOingen]

USDM_OneVia; slw240sx;

I would PM you guys but the admin has private messages disabled. I'm in Beavercreek, about 5 miles east of Dayton.

I go to TigerAuto cause I trust the guys there. It's a father and son shop. Doug (Sr.) is the Autobody guy and his son "Dougie" is the mechanic.

There specialty is Sunbeam Tigers and Sunbeam Alpines, but Dougie is just a great guy to work with. Dougie is not very knowledgeable about SRs, but is a very competent mechanic.

If you go to check them out, tell them Matt Woods sent you over.

Oh, BTW, does anyone have any of the parts listed in my sig? The DP and ECU I want to buy right away.

[slw240sx]

is the 70mm throrrle body the one on the KAe 240s? if so i haev one im not using

[mickee]

$375 shipped... 28x8x3.5

let me know... umm search... cheap fmic and there is a picture there i believe....

[slw240sx]

http://indyracecores.com/