I need a SR20DET motor

Post by **Nismo_Freak** » Thu Jul 25, 2002 2:34 pm

Hey Dauntless how much can you get me a motor for? I will need everything for the swap and uncut harnesses/wiring. Lemme know.

Post by **Daunttless** » Thu Jul 25, 2002 2:34 pm

Tentative pricing is $2200 for the 100% complete motor with startup warranty. It won't exceed that, and dependant upon when things get ironed out, it might be less. But don't count on it. : ) Shipping will range between 100-300 dollars to go anywhere in the nation, so the most will be 2500 shipped to you, if you live in Podunk, Maine like Maineimport. : ) If we do the install there will be a warranty on the motor, undetermined at this point, but if you take it to do yourself or have someone else do it we can't warranty it beyond startup. They will be 100% complete with stock intercooler and everything, complete engine, ecu, tranny, everything to swap it in and start it. I'll be getting them in hopefully in a month or so. : ) Let me know. : )

Post by **MaineExport** » Thu Jul 25, 2002 2:34 pm

It's not my fault I don't live in a bustling metropolis like East Reach-Around, Iowa!

Post by **SpeedFreak** » Thu Jul 25, 2002 2:34 pm

I would be interested in getting an SR. I live in Anchorage Alaska and need to get everything right the first time. No surprizes. If you could get me the complete set up for 2200 I would do it.

Post by **Daunttless** » Thu Jul 25, 2002 2:34 pm

Heh, this is I can do, but I would imagine shipping to Alaska would be a b****. : )

Post by **SpeedFreak** » Thu Jul 25, 2002 2:34 pm

Dont worry about the shipping. Email me what ya got and prices. If I like what I see I will buy now. Got cash want to see white smoke coming out of my fender wells! [email protected]

Post by **Daunttless** » Thu Jul 25, 2002 2:34 pm

They probably won't be in for a month, month and a half. : ) I'll let you know when they get here. : )

Post by **Targonne240sx** » Thu Jul 25, 2002 2:34 pm

I just bought a 1990 240sx and will be looking for an SR20DET and am located here in Iowa, Dauntless. I am sooo new to all this. It is completely stock. Where do I start??

Post by **Daunttless** » Thu Jul 25, 2002 2:34 pm

Well, wait a month, and hopefully you can come to my shop. : ) I can be reached on AIM at Janus Veil

: )

Post by **SpeedFreak** » Thu Jul 25, 2002 2:34 pm

I have a friend that wants to put an sr in his 510 as well. So when I buy 2 of them what type of break could I expect?

Post by **Daunttless** » Thu Jul 25, 2002 2:34 pm

Well, you'd probably get a break on shipping by sending both at once, but if you wanted a deal on the engines too, we'd have to work something out in person. You can reach me at AIM or by email. : ) Let me know.

Post by **Silvia007** » Thu Jul 25, 2002 2:34 pm

Hey Dauntless, I live in Saint Paul, Minnesota. I'm also interested in a SR20DET and was wondering how much you would charge for labor if I did the swap at your shop and how long will it take. Thanks.

Post by **biggie** » Thu Jul 25, 2002 2:34 pm

Yeah Daunt while your at it, I could use one of those S15 motors for free!:ylsuper :help

Post by **ChickenBoo** » Thu Jul 25, 2002 2:34 pm

Yeah Dauntt, I live in East Reach-Around, Iowa. Where's your shop gonna be? :asmile

Post by **Daunttless** » Thu Jul 25, 2002 2:34 pm

Labor will be 1000 dollars for the swap itself. If you have a lot of other work that you want done at the same time, that will be charged hourly. Little things will go with the swap, but if you want something like a Haltech, that goes on the clock. : )

If you just show up one day, it might take us a little while to get to it, but if you call ahead and make arrangements, we can have it finished the same day barring no problems, with problems it would be a two day at the latest. Thats assuming a stock swap. If you have a lot of additional work that needs to be done, count on 2 or three days, easy. With preparation before you get down here, we could have a lot out of the way, but all the additional things take time. : )

Post by **Silvia007** » Thu Jul 25, 2002 2:34 pm

Sounds Great!

Post by **Atom12** » Thu Jul 25, 2002 2:34 pm

Daunttless, what part of Iowa are you in? Just curious, I'm just south of Chicago.

Post by **Daunttless** » Thu Jul 25, 2002 2:34 pm

Cedar Rapids, its eastern Iowa. I"m about 3 hours south of Minneapolis, and 3 hours west of Chicago. : )

Post by **epic** » Thu Jul 25, 2002 2:34 pm

I am intersted in a sr swap as well. I live in Dallas but am originally form Cedar Rapids, Iowa with lots of family there and will be visiting in the fall. I could make it a road trip and drop off the 240sx or pick up the sr setup in the truck. Email me when you have more details on pricing, avail, ect.

Post by **teriyakibroccoli** » Thu Jul 25, 2002 2:34 pm

hey daunt, you still supplying the SRs?

Post by **teriyakibroccoli** » Thu Jul 25, 2002 2:34 pm

o shizzle, 2200 for the s13 redtop :P

Post by **I H8 UR DSM** » Thu Jul 25, 2002 2:34 pm

you dug up a year old thread? Give him a medal

Post by **robbbby** » Thu Jul 25, 2002 2:34 pm

At least he used the search feature

Post by **Aries** » Thu Jul 25, 2002 2:34 pm

robbbby wrote:At least he used the search feature

and for that he deserves a cookie

Post by **teriyakibroccoli** » Thu Jul 25, 2002 2:34 pm

oh jeez, what was I thinking.. haha.. I think i might have accidently tapped "last" page, and saw this thread. my bad... back down it goes.

Post by **gibbo80** » Thu Jul 25, 2002 2:34 pm

daunt i emailed you, please get back to me, the finaces are about ready and car will be ready to make the big 40 min drive down.

Post by **teriyakibroccoli** » Thu Jul 25, 2002 2:34 pm

hahah 40 mins.

Post by **mmdb** » Thu Jul 25, 2002 2:34 pm

hey daunt. I'm lookin' at the s14 swap. I also need a manual clutch pedal and the master and slave cyclinder. Would you be able to throw those in? Also a manual driveshaft. Also how many miles are usualy on the blacktops s14s? Thanx

Post by **Daunttless** » Thu Jul 25, 2002 2:34 pm

Just when you think a thread is dead, sheesh. : ) Yes, I"m still supplying motors ,yes I can do the manual swaps, the motors generally have less than 35,000 miles - and Gibbo, you should have come down with Altima94N and his buddy, we had a bunch of front clips sitting in the parking lot. : )

Post by **gh0st** » Thu Jul 25, 2002 2:34 pm

there is a shop in michigan with 1 for sale http://www.autowerksmotorsports.com

I need a SR20DET motor

I need a SR20DET motor

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums