I'm gonna join you guys :) and Q

[thekawaii]

http://cgi.ebay.com/ebaymotors...=WDVW

I won the auctions . My goal is 270 whp.

still lots of ******* ebayers...... They still don't get they should not bid until the last 30-second.

Anyway, i bidded about 20 second before the auction ended, so the second highest bidder probably thought he's gonna win

i won it by only 10 bucks difference.

anyway... so my question is .....What else do i need to buy to run this? am i missing anything?

I know I have to get Hacked MAF or SAFC, and Fuel Pump.

[ossBASHA]

If you're aiming for 270whp you'll need a decent front mount. As for the kit you'll need a BOV if he's not including one. If you're on a budget you could always get a DSM BOV and recirculate it.

Good Luck!

[thekawaii]

is SMIC too small for 12 psi?

[GEO]

depends on the trubo size

[Florida240sx]

Not a bad deal.Wait to you get the product and check it out first.

[thekawaii]

It's a stock Z31 T3 turbo. with S13 side mount intercooler.

[thekawaii]

my ka-e has 100000 miles on it, will it hold 12 psi? is it too dangerous? The wastegate opens at 12 psi, that's why. And i think i can make about 270 hp with 12psi?

[onosqv]

Yea, that's the auction one of the nicoclub guys put up, so you can ask him directly, hahaha.

[thekawaii]

I thought so haha. anyway 12 psi... 12 psi... some people says KA-e not gonna handle 10-ish pound of boost... dang..... i'm doing research for safe boosting (i know the answer is M.O. M.O.N.E.Y. but looking for other way to do it)'2nd' anyway. i got to beat that camry and etc wrong-wheel-drive cars!!!!!! i was J/K