I'm Almost Finished!!!!!! [56k Die!]

Post by **Toast** » Sat Jul 17, 2004 2:30 pm

Needs tweeked and painted. Nothings really bolted on yet so no coments about fitment untill I'm done.

the wheels are 18x9 and 18x8 and the off sets I think are 32 and 30. Yeah I still have the coilovers on and I put the z32 calipers up front. I need a spacer I just put some washers behind the front for picture purposes olny. I need a 12mm or 13mm thats hubcentic but H&R only make 5mm and 15mm. I dont need H&R but they are the cheapest with studs.

The hood came off this car here http://www.bluntedsilvia.onlineshowoff.com . He sold it to me to get a vented carbon fiber. This hood is carbonfiber but the middle has a transparent green and a yellow pearl over it so the cabonfiber weeve still shows its pretty awsome. But I'm painting it black.

Post by **NX95240** » Sat Jul 17, 2004 2:30 pm

like the rims!!!nice car

Post by **PantherRacer** » Sat Jul 17, 2004 2:30 pm

SOLID NIGGA! dem some serious Rims bey

Post by **Drift Machine** » Sat Jul 17, 2004 2:30 pm

Very very nice.

Post by **NotDave** » Sat Jul 17, 2004 2:30 pm

hows the fitment on the cf fenders? importfan right?. i assumed its probably the best way to get good fitting fenders for teh s15 conversion since the fiberglass ones suck

Post by **Altiman94** » Sat Jul 17, 2004 2:30 pm

thats a very nice looking car

Post by **rico05** » Sat Jul 17, 2004 2:30 pm

See, I like S14.5s (S13.5s are lame) Very very very nice man!

Post by **Shift_Oversteer** » Sat Jul 17, 2004 2:30 pm

haha it must be nice.... =(

Post by **Florida240sx** » Sat Jul 17, 2004 2:30 pm

Very nice indeed. Love those rims.

Post by **AZhitman** » Sat Jul 17, 2004 2:30 pm

WOW!

Spectacular-looking car!

I concur, love the rims. Be sure to post some specs....

Post by **Nismo_Freak** » Sat Jul 17, 2004 2:30 pm

Pics edited for size... 2 mg's each.

Hosted on my server:http://www.240faq.com/s151.jpghttp://ww ... m/s155.jpg

Post by **Mikey240sx** » Sat Jul 17, 2004 2:30 pm

Beautiful car. How much did the conversion cost you?

Post by **crzycav86** » Sat Jul 17, 2004 2:30 pm

The rims look kinda goofy. Perhaps the front has too much wheel gap.. or maybe the pictures are misleading because the front is sitting on 2x4's. Car looks fantastic BTW.

Post by **Toast** » Sat Jul 17, 2004 2:30 pm

Nismo_Freak: thanks for the resize.

Mikey240sx: It was about $2500 but I have the HIDs and bumper suport and bumper bracket. So w/o thouse it would only cost about $2000.

crzycav86: Yeah I'm not done with the front I'm going to lower it posibly another inch. I think they've lowered them selfs down some anyways. I had the front on jack stands for a while so it settled down some more sence then. And I need thouse 2x4s because I cant get my jack under the car without them.

Post by **Toast** » Sat Jul 17, 2004 2:30 pm

AZhitman wrote:WOW!

Spectacular-looking car!

I concur, love the rims. Be sure to post some specs....

Specs: HLSD from S15Blitz type-03 rimsInjen short ram intake Greddy header ASP underdrive pully Apexi N1 exhaust cusco comp2R coiloversS15 front endSilvia steering wheel (from 98 K)26mm front brakes w/ drilled rotorsAlso have rears but need ebrake drumsNewer KA w/ 30k

Post by **Phax** » Sat Jul 17, 2004 2:30 pm

It's looking good. I like the subtle slots in the front fenders.

Post by **NYCRB240sx** » Sat Jul 17, 2004 2:30 pm

love the s15 head lights and the rims look good done, great job man

Post by **silkk** » Sat Jul 17, 2004 2:30 pm

very nice

rico, whats wrong with a s13.5? :P

Post by **S14 Wannabe** » Sat Jul 17, 2004 2:30 pm

I <3 the wheels.

Post by **rico05** » Sat Jul 17, 2004 2:30 pm

silkk wrote:rico, whats wrong with a s13.5? :P

Just not my cup o tea. The lines of the car don't match the front if it is a coupe, and I am a fan of pop ups on hatches. Plus the idea of dropping $2500+ onto the body of my car is just stupid to me. My car is slathered in Krylon and I have sanded half the clear coat off the rest. Here in a few weeks, we will be painting my car flat white primer.

Post by **240sxGT** » Sat Jul 17, 2004 2:30 pm

Looks real good man. Nice and clean

Website · Post by **SoCalS14** » Sat Jul 17, 2004 2:30 pm

Great job, looks fabulous...

Post by **Soulja** » Sat Jul 17, 2004 2:30 pm

For the spacers. Just get the 15mm. You say you need 12 or 13. a 2-3 mm difference is like the thickness of a paper clip.

Post by **JESTER** » Sat Jul 17, 2004 2:30 pm

Dude, looks real good. Take some more pictures, I need a new computer background.

Post by **Toast** » Sat Jul 17, 2004 2:30 pm

As soon as its done I'll take her out for some action shots.

Post by **Toast** » Sat Jul 17, 2004 2:30 pm

Soulja wrote:For the spacers. Just get the 15mm. You say you need 12 or 13. a 2-3 mm difference is like the thickness of a paper clip.

actualy I put some washers on that were 11.1mm and there was pretty good clearance. So I wonder if I can get by with a 10mm. Now I just have to find a 10mm hubcentric spacer.

Post by **Dattebayo** » Sat Jul 17, 2004 2:30 pm

hey rico05, i support your statement. S15 fronts are too curvy for s13's.

And Toast, look, even your licence plate is fast!!! LOOK AT IT GO!whoooooooooooooooooooo. haha

me likey veri much

Post by **Doomed2Walk** » Sat Jul 17, 2004 2:30 pm

nice, personally i want do the zenki ~> kouki conversion, but your 14.5 is looking geeewwwwd

I'm Almost Finished!!!!!! [56k Die!]

I'm Almost Finished!!!!!! [56k Die!]

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums