i keep killing slave cylinders, what am i doing wrong???

Got questions about your Nissan? We're here to help, and it's FREE!
ill_sil
Posts: 79
Joined: Mon Oct 04, 2004 2:06 pm
Car: 91 coupe

Post

I was at a drift event and i made a few runs then the pedal hits the floor. I assume its the slave so i take a peek and sure enough theres fluid coming out of it. (my clutch engaugement was slowly getting worse or lower)

I replaced it with an oreily one (lifetime warrantee)the engaugement was high and it didnt last me 7 miles. same symptoms.

i thought that my pedal was adjusted too high, so adjusted accordingly but it killed another

so my next one i adjusted the pedal low like it was a long time ago thinking it would last longer, but no.


User avatar
rogoman
Posts: 848
Joined: Fri Feb 17, 2006 5:44 pm
Car: 1991 240SX FB
2012 Altima 2.5 S

Post

Go with an OEM unit from a Nissan dealer. Many aftermarket units are crap.

ill_sil
Posts: 79
Joined: Mon Oct 04, 2004 2:06 pm
Car: 91 coupe

Post

found out my TO bearing froze and chewed it slef off the front cover in the bell housing then broke my fork! i have no idea how the hell i drifted and drove everyday, problem solved!


Return to “Nissan Online Mechanic”