I just installed new head gasket -And I have milky oil already

[dirtydan114]

Please -someone-HELP- I think there are other bpossibe avenues to search for solution to this horrific reality im facing. Please offer some otherr possibilities/ solutions and if anybody has a good image or chart/map of all of the coolant lines for a 93 ga16de. Its posible i have a water line somewhere it shouldnt be or an air line where a watrer hoes should be- There is no real chart in either my nissan repair manual nor the chiltons book i may have to swap out the motor if i cant find the solution....PLEASE HELP.!!!!!!!!!!!

[themadscientist]

Wait, step off the ledge and approach this systematically.

First, why did you replace the head gasket in the first place?

If the old one failed, why did it fail, did you overheat it? If so you might have warped the head.

[dirtydan114]

I orginally had an overheat. Did many warpage checks on head ,also wanted to check nclean/reseat valves . all were in exceptional shape So I put it back on with new headgasket .
I believeve the problem lies in that I put a wrong hose over tube under manifold, intake. Then got water in the intake. .I believe I need a complete diagram thats actually showing from a-b -c-d etc for the water hose map On my nx. ANY HELP IS STILL APPRECIATED1