I have the fastest N/A 240sx maybe hehehe

[240sxrunner]

Well tommarow is the last day the track is open for the summer. Taken the 240 there and hopeing i can get the fastest KA24DE time here. Hers what i have. 92 240s-Hot Shot Headers-Greddy Evo Exhaust-No Cat-VLSD-P245 Tires Proxie T1-S's-NGK Power V plug wires-HP Plugs-MSD 6a Ignition system-HKS Intake-UD pulley set-B&M short sifter-MSD Blaster Cap-91 Cam gears-PMC Camshafts-Lighten Flywheel-ACT 260 Clutch New-TIen Suspention-Lowering Springs-Strut Braces-Dyno Tuned-Poly Engine Mounts-All Full Syn Fluids

I am hopeing to run a 14.5 in the 1/4 do u think that would be a possiblity if it is will I have the fastest N/A 240 here? and last question will 110 leaded racce gas help me at all?
Modified by 240sxrunner at 2:35 PM 9/23/2004

[240marcuSX]

i dont know about a 14.5 but maybe

good luck, and let us know! id love to see that happen

[s13EastTN]

I think aries has ya beat on the NA 240, but he's sorta cheating there. Some NA people here have E slugs in there, milled heads and stuff like that. Your main power adders areheaderexhaustno catintakepulleyscamsand flywheel

Pretty impressive, but don't expect to be blown away by numbers.

Maybe an electric fan if you don't have one?Bore out the TB/IM/head.

110 won't help you much at all for the most part, unless you have FI.

Either way, good luck to ya dude.

[cory2081]

Race fuel will help. I read an article on that once. It has a higher oxygen content if I remember correctly.

[ILikeMy240sx]

I say high 14s or low 15s (more likely) I dont know about 14.5 tho...

but good luck

[rico05]

I have a vid of an 11second KA24DE on N20. Has to run at least low 12s w/o spray.

[AZhitman]

I'm betting on a 14.9

Let me know if I'm right.

Hope you get your 14.5, though!!! Go kick some arse.

[SeVa-S13]

I think I know what car you're talking about am I'm pretty sure that car, and cars like it, are tuned specifically for large shots of Nitrous, and without it, they aren't exactly the same...(It's be much slower than a second higher)

[HashiriyaS14]

Ever hear of the Nissan Motorsports KA24s run in the SCCA GT3 class? 250hp 9k rpm all N/A. Some of the parts required to make these engines can be had from http://www.courtesyparts.com

You actually see the completed cars and engines for sale once in awhile, I think I saw a brand-new GT3 spec KA for $7k or something like that.

[hamsturbation]

the only thing race gas will do is not detonate as easy, and since its probably leaded be nicer on your valve seats....its not going to make you go any faster

[Aries]

the power those mods are making will only net you 15.0-14.8

You need to bump up the compression ratio or do a cam swap (more than just the cam gears) to get much more out of it N/A

[240marcuSX]

any results yet guy??

[ilsha]

rico05 could you send me that video

[2Fast240sx]

You need to bump up the compression ratio or do a cam swap (more than just the cam gears) to get much more out of it N/A

how fast will it run if you do this

[deviousKA]

My SOHC is faster than your DOHC

[93sleeper]

HashiriyaGDB, do you have any more information about those GT3 engines? A quick google didn't turn up much...thanks

[240sxrunner]

Resluts are BACK i ran a 14.3 to 14.6 i have the time slips to prove it too heheheh i did better then what i thought i would. my 14.3 i was going 99 mph at the end of the quarter with a .3 reaction

[w1ngzer0]

good job on the run man.

Race fuel will help. I read an article on that once. It has a higher oxygen content if I remember correctly.

BLARG NO

[2Fast240sx]

awesome run dude

[SloS13]

holy crap. way to go man. Almost as fast as my KA-T

[240marcuSX]

Jesus! thats it, time for an n/a build up. good work man!

[Doomed2Walk]

Nice run. Did you gut your interior?

[Aries]

you can drop .2-.5 off your ET with a proper compression increase and cam swap

[Doomed2Walk]

-PMC Camshafts. I think he has cams along with his 91 cam gears.

[Nismo_Freak]

-Hot Shot Headers-Greddy Evo Exhaust-No Cat-VLSD-P245 Tires Proxie T1-S's-NGK Power V plug wires-HP Plugs-MSD 6a Ignition system-HKS Intake-UD pulley set-MSD Blaster Cap-PMC Camshafts-Lighten Flywheel-ACT 260 Clutch New-Dyno TuneModified by 240sxrunner at 2:35 PM 9/23/2004

Quick question... what did you dyno tune on your car? ... I don't see much that's adjustable? What sort of management do you have?

[Aries]

he modified the original list after I had posted about cams.

[Dattebayo]

WOWkinda hard to believe. Can you post the slip on that time? How about some other information?

[cory2081]

Seriously, I read an entire article once that had a pump gas/race fuel comparison. They took a car, ran it in the 1/4 a few times on pump gas, drained the tank, then ran it again on race fuel. The car did pick up some. It's been years since I read this, I'm gonna see if I can find it.

[Chingon]

HashiriyaGDB, do you have any more information about those GT3 engines? A quick google didn't turn up much...thanks

a single search on google for ka24e race engine yielded this:

http://www.race-cars.com/engsales/othereng.htm

try googling harder.

[jdmfreak]

Dman nice run.

PS: post timeslips