I Have Got an Issue. Need some help

[lecros101]

I have been installing HID's for the past hour and a fuse has blown when i went to turn them on. I cant find the fuse box layout in the owners manuel which doesnt make sense .... Which fuse is the fuse for the headlights? Quick help would be nice!

Nevermind took care of it, HID's seem to be working good except for the automatic up/down window button doesnt do it automatically anymore? what should i do

[boystar22]

Roll the window halfway down, then hold the switch to close it and continue to hold the switch for 5 seconds after the window is closed. You'll have to do this with both windows (if the passenger is automatic too). The reset procedure is listed in the manual and you'll have to reset them anytime you disconnect the battery.

Basically by resetting them you are recalibrating the pinch-protection sensor that prevents the automatic window from closing on someones arm or finger.

[lecros101]

Thank You!

[AlexM.]

I need to fix my autowindow also. Just havent worried about it cause I know its been addressed so many times already also. Glad yours are working out. Did you get the 6000k or 5? 35 or 55w?

[lecros101]

I got the 35w 6000k from ddm

[lecros101]

Now I have got another issue... Its been a little chilly here the past few days and I dont know if it is affecting this or not, but when I turn my lights off then on a few times sometimes one or both of the headlights dont cut on. This problem is sporadic because sometime it works and sometimes it does not. It works probably 3/4 of the time then It wont cut on. ha anyone had this happen? If so, suggestions??

[boystar22]

A relay kit for the hids would most likely fix the problem. Mine will do this if I turn them off and back on in quick succession, or if I start the car with them already on. It isn't good for the ballasts to go from on to off and back on quickly. People with the automatic headlights generally are the ones to have this problem (because the lights come on when you unlock the car and then trip off and back on quickly during the engine startup cycle).

[lecros101]

Thanks for all your help man. Yeah I am running a relay harness right now. Im guessing its not a big deal cause I was flicking them on and off like you said.