i have a 95 240 and my window wont rollup

ONLY for ADVANCED technical discussion about the 240sx!
mr.wetto
Posts: 9
Joined: Thu Jul 19, 2007 1:19 pm

Post

the window was woking just fine until i had a fender bender nothing serious or of any dmg to car (just some small scratches no dents or anything) but window wont roll up anymore(can anyone show me some steps or real pictures of what might be wrongand what i can do to fix it)

i searched the forums but all i found is pdf's and diagrams that only wiring specialists would recognize-(also but u dont have to answer this one-my check engine light stays on now any ideas<<< this is like 5 months after the "accident")


User avatar
Dano
Posts: 11535
Joined: Tue Oct 29, 2002 8:01 pm
Car: '05 Nissan Frontier Nismo CC
'95 Nissan 240SX base
Location: Kansas City, KS/ Phx, AZ
Contact:

Post

It sounds like you have some pretty hefty wiring problems associated with the accident. If the window was working after the accident then it is likely that the window amplifier went out, which is very common on s14s. When you take off the door panel on the driver's side there's a little white box with a connector going into it. That's the amplifier. Probably cost you in the realm of $75 but you can save some bucks by ordering from one of our NICO parts suppliers like West Covina Nissan.

-Dan

User avatar
Turkishs14
Posts: 100
Joined: Sat Aug 25, 2007 5:17 am

Post

just take your door panel off and see whats going on....its fairly easy to work on these cars...


Return to “240SX Technical Forum”