i Found this on my clip. What is it?

[chicos240]

This was connected to the sensor closest to the fron of engine(not the heated oxygen sensor). Can you tell me what it is?Where can I get a manual for it so i can hook it up correctly on my s14.

[jdm_master_X]

well i mean its clearly labeled....hahaha.

[chicos240]

I know its clearly lableled. Maybe my post should have been a little more specific. Its 3 diff modules they were all interconnected. I have no clue what they are, do they hook up to the gauges? Do i need them to set my sr running? If i dont hook them up, what do i hook up that sensor to on the exhaust mani to?
Modified by chicos240 at 1:20 AM 12/16/2006

[jdm_master_X]

o2 sensor connects to part of the main harness. its a three pin connector.

u dont need those things to run the car im sure.

[Blown240sx]

holy **** dude you got a lot of nice **** on that clip.

That is the control moduals for Electronic guages that greddy uses, and the thing in the top of the exhuast is a pyrometer. It measures exhuast exit temp and sends the info to the box that says Ext Temp Meter. Those three boxes and meter are worth about 600 bucks. But you do need the guages, the guages plug into the data link box.

[chicos240]

Thank you for your responses. This clip is full of easter eggs. I have the gauges....they are on a pod. But I have always thought they look super rice. So I will leave them off untill I can buy a digital chingadera that displays discretely. Ok so next question, where does the pyrometer hook up? Bape mentioned the O2 but that is snug as a bug on the harness. So this pyro chingas...where does it hook up stock. I'm so close to ignition I can smell it. Thank you for your time.

[S14-NEO]

the boxes are designed to store info such as peak boost and warning lights when you boost too high or if you EGT's are too high...it depends on what guages the boxes are for.

[S13240]

The pyrometer as you can see in one of your pictures is mounted onto your exhaust manifold. It has nothing to do with o2 sensors.

No such thing as stock. There's no issue if you just leave it unplugged from the main unit.

[chicos240]

Thank you all for your responses. I am now better informed. They are interfaces between engine and gauges that I don't need, but are nice to have. And the pyrometer is a big thermometer that I do not need plugged in for now.

[s13r20det]

^^il buy those greddy gauges from you! cash in hand, check your email.thanks

[chicos240]

I did not receive it

[s13r20det]

i tried sending another one... let me know if you got it... is your email in your profile current? email me pics of them at [email protected], i will buy them... let me know.

thanks,

Mario