I fixed my acceleration problem...

Information on the naturally-aspirated KA24E and KA24DE engines.
iambud240
Posts: 72
Joined: Wed Mar 16, 2005 4:31 am
Car: 240sx 1991 2.4

Post

I figure I'd right this up just incase one of you have the same problem.

when I would hit the gas half way down or e less the car would run fine.But when I would push the gas all the way down, once the car would get to 4000 or so RPM it would take for ever to reach the red line. and my temp gauge would bounce around.

Iam not sure what fixed it but here is what I did.

#1. I clean out the throttle body

#2 New 02 sensor

#3 cleaned of the temp sensor and plug

#4 cleaned mass air sensor

This didnt take much time at all and it worked out great! the 91 se coupe runs like new


User avatar
S13 240SX
Posts: 1065
Joined: Thu Dec 08, 2005 2:44 pm
Car: 93 Mazda Miata

Post

what did you use to clean the temp sensor and plug becasue I know i have to clean mine but i wanna use the right stuff to clean it with so i don't screw up the part? can i just use carb cleaner or what?

iambud240
Posts: 72
Joined: Wed Mar 16, 2005 4:31 am
Car: 240sx 1991 2.4

Post

I just used the carb cleaner then dried it off real good

User avatar
S13 240SX
Posts: 1065
Joined: Thu Dec 08, 2005 2:44 pm
Car: 93 Mazda Miata

Post

ehhh i think i may use electrical cleaner for mine.


Return to “KA24E / KA24DE Forum”