It took me long enough, but I finally have a few pics ready. As you can see, one is below. To check out the rest, just click on the link. I am going to work on a write up here next week sometime.
Ryan:boink :boink :boink
I finally got some pics
-
Article Manager
- Posts: 0
- Joined: Sat Jun 14, 2003 9:10 am
- Contact:
Both of you:
E-mail me w/ pics and write-ups please so I can add to our member's rides section. [email protected]
E-mail me w/ pics and write-ups please so I can add to our member's rides section. [email protected]
I am working on it.I have some more pics that I want to go through first.RyanArticle Manager wrote:Both of you:
E-mail me w/ pics and write-ups please so I can add to our member's rides section. [email protected]
-
Jeff Williams
- Posts: 3394
- Joined: Fri Aug 02, 2002 4:17 am
- Car: 1994 Infiniti Q45t
2000 Infiniti I30t
2004 Infiniti M45
71, 72, 73, 82 & 2000 Corvettes - Contact:
Nice rides! I took the opportunity, and created a couple of photo albumns, for my Q45 &my old Truck.
Here is the link:
http://www.imagestation.com/album/?id=4289657335
Here is the link:
http://www.imagestation.com/album/?id=4289657335
-
Jeff Williams
- Posts: 3394
- Joined: Fri Aug 02, 2002 4:17 am
- Car: 1994 Infiniti Q45t
2000 Infiniti I30t
2004 Infiniti M45
71, 72, 73, 82 & 2000 Corvettes - Contact:
No, I just had to ride through the median at 85 MPH, while an 18 wheeler used my lane. I got a new front bumper out of the deal, along with a new cat, some power steering lines, and an oil pan. I had to pay for the replacement of my shorts.:pface
Alabama does not require front license plates. Usually, the dealership screws their tag to the front. My car had the dimples for the holes, but luckily had not been tapped. My new bumper is the same way.
When I orderd my 2000 I30t, I specifically instructed the dealership to NOT install the front plate. They oblidged.
I would fill existing holes with paintable calk, then touch it up with factory paint, if the holes were there 9I have done this in the past to an old Honda) It looks O. K. but not show quality.
Thaks for the compliments.
Alabama does not require front license plates. Usually, the dealership screws their tag to the front. My car had the dimples for the holes, but luckily had not been tapped. My new bumper is the same way.
When I orderd my 2000 I30t, I specifically instructed the dealership to NOT install the front plate. They oblidged.
I would fill existing holes with paintable calk, then touch it up with factory paint, if the holes were there 9I have done this in the past to an old Honda) It looks O. K. but not show quality.
Thaks for the compliments.
