I am awesome, Females FTW!

[99QX4]

So just as the title reads, i'm freakin' awesome. Basically the story is that I got an NRG strut bar for the G but Ronnie couldn't get it to fit. The bolt was about a 1/4 of an inch off and just wasn't fitting. So he called the company and basically their reply was to send pics to verify the issue. So some time passed (about a week or so) before Ronnie had a chance to work on the cars again. So on Monday he was installing his new Injens and i decided to put on the strut bar "that didn't fit" to take the necessary pics. Well it turns out that somehow it magically worked for me! Now sure it was a little bit of a tight fit, but hey i got it!

Here's what it looks like: And me proudly showing off my accomplishment!

[Focusedintntions]

Silly Ronnie...what was he doing working on cars? Doesn't he know that's a womans job? I mean it's like making sandwiches!!

haha j/k

Awesome job ftw!!!!

[zozoka1212]

Nice now we have to hear the other side of the story. Omega where are you?

C'mon Ronnie what is going on? She schooled you hahahha. Don't worry we won't tell anyone. :rockband

zozo

[SneaKe]

Sounds like the first time he had tightened one side before setting the other. It happens...

[Omegamerc]

Sounds like the first time he had tightened one side before setting the other. It happens...

exactly what I did, I DID unbolt them and try again and the fooger was just not workin with me. All worked for the best, i got my injens installed, and she got her strut bar done too. Which reminds me i gotta post pics! PIA to install though.

Silly Ronnie...what was he doing working on cars? Doesn't he know that's a womans job? I mean it's like making sandwiches!!

haha j/k

Awesome job ftw!!!!

I cook dinner too you know!

[Sentientbydesign]

Just like the "ECU" right?

[Omegamerc]

Just like the "ECU" right?

OH SNAP I just got double whammied on a single thread, calling on mods to lock this down before I get rolled

You should have real numbers soon, my car is out of service till this fri/sat bumper is in my garage, lights are 45mins away, some crazy stuff coming!

[Sentientbydesign]

I'm just ya cuz it's fun.

I remember a time when I barely knew anybody here on NICO, back when I poked around the Max/I30 forums.

It's kind of nice knowing a little insider info.

[Omegamerc]

I'mma need your wiring for the track soon, I just read some time slips and I'm seeing my car stock run high mid-high 14s. Only downside is buying that stupid helmet!

[Sentientbydesign]

All you've got to do is let me know.

I've got half a spool of gray and a spool of blue coming in next week.

[SVTCOBRA]

Very awesome! Looks great!!

Now, you need a Z-tube.

[zozoka1212]

OH SNAP I just got double whammied on a single thread, calling on mods to lock this down before I get rolled

You should have real numbers soon, my car is out of service till this fri/sat bumper is in my garage, lights are 45mins away, some crazy stuff coming!

Sounds like angel eyes to me.

zozo

[adren77]

Hey I also bought this strut bar.

I also couldn't get it to fit! I installed it but it was too high for the hood to close. I also had to flex the bar in order to get the bolt to fit.

Do you know what you did wrong the first time so I can try and correct it!?

[TeflonG35]

Atleast we get pics with a pretty girl in it. Better then most pics.

[joe603]

So....notice any difference in handling? quanto costo?

[BrandAidDesignG35]

Atleast we get pics with a pretty girl in it. Better then most pics.

LOL

Teflon, this is not a p0rn site

[joe603]

Sometimes I wonder...lol

[99QX4]

Hey I also bought this strut bar.

I also couldn't get it to fit! I installed it but it was too high for the hood to close. I also had to flex the bar in order to get the bolt to fit.

Do you know what you did wrong the first time so I can try and correct it!?

Well the hood wouldn't close on the first try either but we moved the bolts all the way down to the lowest possible position. The hood closed but i guess when i open it again i'll see if it rubs.

So....notice any difference in handling? quanto costo?

You know i noticed more of a difference on Ronnie's car when he put his on. On mine there was an improvement but not as great as Ronnie's. And the cost....i'm trying to recall but am not sure. Ronnie actually got it for me so i'll hafta ask him and he can give you some info.

Very awesome! Looks great!!

Now, you need a Z-tube.

More mods are on the way

Just like the "ECU" right?

[Omegamerc]

Sounds like angel eyes to me.

zozo

oy vey!

I'm supposed to install my headlights + bumper back on tomorrow, only problem is a big *** tropical storm on its way by tomm afternoon.

The NRG bar is 100$, GTspec is 215$.

[zozoka1212]

Post up some pictures if you get a chance to install them back. I am lookibg forward to see that.

Damn storm season. Put both of the G's in the garage.

zozo

[Omegamerc]

if alls good tommorow, only problem is the weather, but that won't stop me!

[Omegamerc]

l

Sounds like angel eyes to me.

zozo

Here you go crystal ball seer zozo http://forums.g35club.org/zerothread?id=365712

[Sentientbydesign]

Here you go crystal ball seer zozo http://forums.g35club.org/zerothread?id=365712

Damn you!!! Those look awesome. Where are mine???

How much?

[Omegamerc]

Damn you!!! Those look awesome. Where are mine???

How much?

500$ WITH paint w/"1st customer to have it done" discount.

[Sentientbydesign]

500$ WITH paint w/"1st customer to have it done" discount.

Ouch! I can't say "it's not worth the money" because I'd be lying, but I might have to try this on my own. 5 notes is a lot for me to dish out right now and not have a car to drive too.

[zozoka1212]

It is a hell of a job to do. I heard about Igor. He iis fricken awesome. I've seen a 1st gen coupe done by him. Professional job is the minimum you can say about it.

Omega just shake his hand for it.

zozo

[audtatious]

exactly what I did, I DID unbolt them and try again and the fooger was just not workin with me. All worked for the best, i got my injens installed, and she got her strut bar done too. Which reminds me i gotta post pics! PIA to install though.

I cook dinner too you know!

Post a how-to if there isn't one. Then I can give you a custom title to go with your roll as Laurens "worse half"

You two making the long trip down to Atlanta next weekend?

[Omegamerc]

Post a how-to if there isn't one. Then I can give you a custom title to go with your roll as Laurens "worse half"

You two making the long trip down to Atlanta next weekend?

For the Injens? biggest PIA ever, like 2hrs+ to install em. I can do the pics for the strut bar though. Won't be heading to ATL, Carlisle is better, and closer!