Hydraulic Lash adjuster removal and bleeding

Discuss the RB20, RB25 and RB26 series engines.
Post Reply
chixwithtrix
Posts: 360
Joined: Mon May 26, 2008 2:02 pm
Car: Black '91 240sx drift car
Contact:
Contact chixwithtrix

Post

About to start work on this today on my RB25 and would like to see if anyone has a photo walk through of the process of removal from the head. Preferably on an RB engine, but any similar engine is fine if there are photos of it. Or at least a better walkthrough than the FSM. I want to make sure this gets done right, thanks


Top
User avatar
Coolwhip
Vendor
Posts: 3138
Joined: Fri Feb 06, 2004 7:29 am
Car: RB26 Raw Brokerage War Machine
Location: Orlando, FL
Contact:
Contact Coolwhip

Post

Darius should have a write up somewhere IIRC, or it was heavily covered in a thread where the discussion of the Hydro lifters were brought up.
Top
chixwithtrix
Posts: 360
Joined: Mon May 26, 2008 2:02 pm
Car: Black '91 240sx drift car
Contact:
Contact chixwithtrix

Post

nvm, done with the exhaust side already anyway
Top
Post Reply

Return to “RB20DET / RB25DET / RB26DETT Forum”

Search for Nissan stuff on ebay!
Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2026 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy