hybrid clutch

[minivan_don]

i didnt see it on here ... yet.... but i thought i would post it.

this is a hybrid clutch setup for ka-t guys where they take a 250mm 6 bolt rb flywheel and use a 350z clutch which results in a crazy tq capacity and a more streetable clutch. this is very similar to the White Bunny Special (nissan d21 fw + 90-96 300zx NA clutch) but 1 step better imo.

anyone tried using the 350z cluch on an rb fw in the rb ??

http://www.ka-t.org/forums/viewtopic.php?t=14589

[Kansei240sx]

That is freaking sweet! Does that also mean that KA24DE lightweight flywheels will fit my series 1 RB25DET?

[minivan_don]

yes but thats a step backwards ...

ka = 225mm 18lbsd21 = 240mm 23lbsrb = 250mm ___lbs

the overall purpose is having a larger part doing the same work, which usually means it can do it easier than a smaller part.

[Kansei240sx]

touche

[minivan_don]

bump!

want to get a better idea of what im going to get for a clutch. i tried out my buddies unsprung 6puck on his ka and i hated it! it was like a light swtich - ON OFF! im hoping that the sprung version for the rb is much more foregiving.

[minivan_don]

bump

im set on getting th fidanza rb fw ... clutch, i know the na z32 clutch (240mm) works but i havent found any 6puck sprung clutches other than the ebay versions (which i have 1 at my access for hella cheap - new).

ive also found that JWT lists a 240/250mm light-wight fw for the all rb's ... $425http://www.jimwolftechnology.c...D=463
Modified by minivan_don at 1:56 PM 1/28/2007

[lucky7]

RPS makes a sprung 6 puck. thats what i have. although, i havnt had a chance to drive with it yet. im hoping its alright.