How To Weld The Diff?

[MFP240]

So I tried searching but couldnt find anything. Does anybody know where exactly you weld the diff at? Maybe some pics? Any help thanks.

[LayNLow240]

the red circles are where you weld it.be sure to clean the HELL out of the gears before you go to weld it. try and get as much of the gear oil out as you possibly can, so you dont contaminate your welds.good luck

EDIT: this pic doesnt show everywhere to weld, but there are 8 main points to weld. you can clearly see 2 of them in the picture. the other 2 are on covered by the ring gear.but basically, you want to weld each corner where 2 gears meet. 4 on each opening. then you can weld the gears to the carrier too if you want more strength. just be sure you dont weld or get any splatter on the ring gear or it could be bad.