how to take out fuel injector

[irichjohn]

just wanna know if anyone have good idea on how to take out the fuel injector coz its pain in the ***.i cant take it out & its really damn hard.

[bone_stock_240]

Just to clarify, are you trying to take out the individual injectors, or the whole fuel rail itself?

[irichjohn]

individual?

[cbt240sx]

They should come out fairly easily, depending on how long they've been in there. I replaced the o-rings on mine and I had to remove the whole fuel rail. Fairly simple.

[deuce_40]

just unscrew them and try and twist them free then use to screw drives and carfully pull them out.

[Rekless KA]

yeah thats pretty much how you do it, just be sure to not break the sides too bad, i did on my first motor but still worked ok, it just may take some time.

[krazydriver]

i just popped mine out today.Unscrew the top cap over the injectors, then put the screws back in.Using 2 flathead screwdrivers put them into the holes on the side of the injectors and pry straight up using the screws you put back as a pivot point.

I had also soaked the fuel rail in pb blaster over night so i'm sure that helped a little.

[Florida240sx]

Big screwdriver