How to remove the front door on a 2012 sedan?

[atikovi]

My concern is the wiring. How do you disconnect it before taking off the door? Is there a connector by the frame?

[reuhzaki]

The wiring usually has to be disconnected behind the interior door trim panel, leave the window rolled up for good access to the plug, pull it out through the door and unbolt the door

[atikovi]

Thought there might be plug-in connector at the frame post. Got to take the fender off first, then will check that.

[reuhzaki]

Not that I know of, Iv never had to work on a versa but Iv been in auto body work since 2008 and all of the connections are in the door

[atikovi]

Looking at the service manual it says,

1. Remove front door harness grommet and then pull out the harness from the vehicle.
2. Disconnect front door harness connectors.

Not sure which way to pull the harness. From the body or from the door. No mention of wiring that has to be disconnected behind the interior door trim panel. Will see.

[atikovi]

3 connectors in the body frame behind the rubber grommet. A pain to disconnect with such a small opening.