How to remove driveshaft front section

[frankozz]

Me and my friend are doing an engine and transmission swap. Also doing an auto to manual swap. Today we were putting the engine and transmission into the car and ran into a little trouble, the driveshaft from the automatic s14 doesn't mate with the manual transmission, a quick search on the forums revealed that we needed the driveshaft front section from a 5 speed. So now we have the5 speed front section and we are debating as to what is the best way to swap out the driveshaft sections. We can cut it off and weld in the manual driveshaft front section or we can try and remove the front section from the other piece of driveshaft. As a side note, we got the front section from a friend that did an rb20 swap into his s14 and had to cut and weld a new front section. Also the car we are working on is an s14 with abs and lsd with the ka24de engine.

Basically what I want to know is this

[-RJ-]

just get a manual driveshaft? it would solve everything

[GO240]

i remember seeing my friend knock out the pin with a bronze tap and a hammer