how to make injectors work

[ca18detpowered]

ok. has anybody had experience with this maybe.

i have high impedence 460cc injectors from rx7 n/a

i want to use them on my ca18 but it uses low impedence injectors corect?

how do i go about wiring them....resistors?

any info would be greatly appreciated.

thanks alot

[r34 gtr]

you are going to need some dropping resistors. the ca injectors are ~2.2 ohm. measure yours and figure out what you need to get the correct resistance to the ecu. i reccomend radio shack.

[dattodude]

Someone didn't take their vitamins this morning.

CA18DE are High Impedence injectors.CA18DET are Low Impedence InjectorsRX7 S4 are Low Impedence Injectors (direct CA18det fit)RX7 S5 are High Impedence Injectors (need removal of resistors, and new plug)

Look at the red box.

[float_6969]

Are you sure the injectors you have are high impedence? What is the resistance? If they are high impedence, they you simply bypass the resistor pack. Better yet, find a set of low impedence and 460'ish injectors and then you don't have to hack up your harness.