how to check ecu for codes

Post by **scottsnissan** » Thu Jun 16, 2005 11:02 am

I ahve a #62 ecu and i need to check for codes how would i do that?

Post by **SpeedRacer1** » Thu Jun 16, 2005 11:30 am

How to read codes...http://www.240sx.org/faq/artic...h.htm

What 62 ECU codes mean...http://sr20det.nismo.org/srtech.htm

Post by **scottsnissan** » Thu Jun 16, 2005 11:34 am

thx man can i use this on on a blacktop s13.Im having probs with my car.I have it listed on here.Also what temp sending unit should i use.

Post by **SpeedRacer1** » Thu Jun 16, 2005 3:21 pm

It will work an early blacktop ECU's so E5 and E6. It will also work on redtop ECU's 62 and 63. It will NOT work on late model S13 blacktops ECU J4.

Post by **scottsnissan** » Thu Jun 16, 2005 4:01 pm

thanx i got a 55 which i was told normal reading

Luke · Post by **Luke** » Thu Jun 23, 2005 2:04 am

What the hell I have an E5 and there is no LED to read the diagnostic codes. Does anyone else have a blacktop with an E5? This will really help me troubleshoot some things.

Post by **Taylor_Durdan** » Thu Jun 23, 2005 2:51 am

e5's dont have LEDS.. watch the check engine light (MIL) on the dash

Luke · Post by **Luke** » Thu Jun 23, 2005 6:32 am

Taylor_Durdan wrote:e5's dont have LEDS.. watch the check engine light (MIL) on the dash

Do you know what color the signal wires to the Light in the dash are? Or what color it is off the ECU? I don't believe mine's hooked up.

Luke · Post by **Luke** » Fri Jun 24, 2005 12:55 am

Anyone?

how to check ecu for codes

how to check ecu for codes

Re: (SpeedRacer1)

Re: (SpeedRacer1)

Re: (Taylor_Durdan)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums