how-to and DIY info needed!!

[nismo1219]

hey guys, here's the deal. i got several parts waiting to be installed just sitting around in my garage. im not too sure that my install guy will have time to get to everything before nopi so im going to attempt as much of this as possible on my own. if you guys have a how-to saved somewhere or know of any links where i can find a diy relating to any of these parts id really appreciate it.

i need how-to's for these parts - 1) unorthodox udp2) headers/y-pipe3) stillen body kit4) rear sway bar

if any of you guys can help me id appreciate it. thanks again!!

[internetautomart]

they are all (except the stealin kit) just direct swap that is covered in the FSM

[nismo1219]

fsm?? i need some links or soemthing that has a how-to. i looked through vqpower.com. i remember seeing a how-to on the UDP but i can remember where i saw it. do any of you happen to know where one is?? also one for the rear sway bar???

[Chris92SE]

for a udp you will need to find a source for the correct belt size, since they are going to be different than stock.

[nismo1219]

for a udp you will need to find a source for the correct belt size, since they are going to be different than stock.

i knew i would need a new belt. im planning on picking one up at autozone next day off of work. but i need a how-to page for the rest. for the life of me, i cant find the one i saw befoe. i shouldve saved it.