how much is my sr20 worth?

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
stealthyninja66
Posts: 10
Joined: Wed Feb 27, 2008 6:06 pm
Car: 2000 Sonoma

Post

ok guys i have a sr20det that im pulling out of my car andi was wondering how much it would be worth for parts since its a entire engine w/ sensors and all including a bad turbo and maniford. not sure of the shape of the engine but it just had the blocked decked and a head gasket replaced. it runs good but im pulling it out because the turbo was shot and was ripped apart like some thing went threw it and i dont want to chance it on an engine. so im just goint to replace it.

if i dont answer here please email me at [email protected]


stealthyninja66
Posts: 10
Joined: Wed Feb 27, 2008 6:06 pm
Car: 2000 Sonoma

Post

forgot to add s13 sr redtop w/ t25

User avatar
redtop91
Posts: 16325
Joined: Thu Sep 07, 2006 9:05 am
Car: ↑ ↑ ↓ ↓ ← → ← → B A Start

Post

Why are you selling the engine if all that is bad is the turbo? This thread makes no sense. Also unless you got all the pieces of the turbo from the hot and cold piping there is a small possibility that some of it made it into the cylinders, nicking up pistons and the cylinder increasing friction and for the pistons increasing the possibility of detonation.

stealthyninja66
Posts: 10
Joined: Wed Feb 27, 2008 6:06 pm
Car: 2000 Sonoma

Post

redtop91 wrote:Why are you selling the engine if all that is bad is the turbo? This thread makes no sense. Also unless you got all the pieces of the turbo from the hot and cold piping there is a small possibility that some of it made it into the cylinders, nicking up pistons and the cylinder increasing friction and for the pistons increasing the possibility of detonation.
yes im selling it for that reason im selling it as a part engine for that reason there is no to the side mount from what i can see im pulling the head off tomarrow.

User avatar
redtop91
Posts: 16325
Joined: Thu Sep 07, 2006 9:05 am
Car: ↑ ↑ ↓ ↓ ← → ← → B A Start

Post

Sr longblocks sell for pretty cheap. I'd probably give you $1100 if you could guarantee no block issues.

mistamacadamian
Posts: 182
Joined: Wed Feb 21, 2007 1:29 am
Car: s13

Post

is it rlly that hard to place replace the turbo/mani and do a fmic?

User avatar
redtop91
Posts: 16325
Joined: Thu Sep 07, 2006 9:05 am
Car: ↑ ↑ ↓ ↓ ← → ← → B A Start

Post

It's a cake walk. Just set aside a couple of hours for both.


Return to “SR20DET Forum (rear-drive)”