How many rb owners out there? ---- List Mods

[frosted flakes]

Hello,

I am interested in how many rb owners there are. List what engine you have, what year engine, what car its in, what year the car is, the engine mods, and the HP your are putting down. Also list your goal HP. Also list your website or pics if any.

I have a 1991 rb20det in a 1992 240sx hatchback. I have stock exhaust, cone filter intake, stock boost, stock turbo. 176RWHP or 215HP to the flywheel. My goal is a 350RWHP daily driver.

http://members.cardomain.com/funkycrzyshiet

[crxcess]

I have a 91 240sx coupe with a silvia front end conversion and a rb20det of unknown year out of a r32 gts. No real mods to speak of, but im planning on having around 300 hp to the wheels when im done with it. Im using it as a daily driver to school. The pic isnt real clear but it gets the point across.

[dekand]

clean car frosted, ive seen it before on cardomain, just looks nice.

my rb25 **should** be in and running end of this month, if all goes well. i can't wait to get it in the waiting is killin me but i can't just print out money well i could... haha

i plan to run it essentially stock other than exhaust for a while but i want to get 275-300rwhp out of it eventually... basically just a badass daily driver.

[Bluefire]

1996 RB25DET Series II going into a 1991 Fastback (As soon as school freakin ends!!!) Stuff I have GTR intercooler, mines boost controller(next time I see my cuz, and I got a greddy manifold on the way. Shootin for a solid 400!!

craploads of pics here:

http://www.imagestation.com/album/?id=4 ... 4289339987

-Bluefire

[dekand]

man thats crazy what you did to the intake manifold lots of labeling too! thats what i plan on doing , im sure its worth the time in the end.

[NISMO_RB25]

1996 RB25DET Series II going into a 1991 Fastback (As soon as school freakin ends!!!) Stuff I have GTR intercooler, mines boost controller(next time I see my cuz, and I got a greddy manifold on the way. Shootin for a solid 400!!

craploads of pics here:

http://www.imagestation.com/album/?id=4 ... 4289339987

-Bluefire

That is sweet. How much did it cost to have the intake manifold done like that?

[NISMO_RB25]

1992 240SX hatch with 97 RB25DET. Mods so far: Apexi N1 Dual exhaustHigh flow CatWalbro fuel pump

I plan on around 300-350.

[NISMO_RB25]

I forgot the pics.

http://www.imagestation.com/al...nvite

[NISMO_RB25]

try this link instead:

http://www.imagestation.com/album/?id=4288030185

[crxcess]

Here got a better looking picture of it...

[HotWIRED]

hey nismo_RB25 what kind of fans are you using?

[frosted flakes]

Nice cars everyone keep them coming!

[Bluefire]

man thats crazy what you did to the intake manifold lots of labeling too! thats what i plan on doing , im sure its worth the time in the end.

Oh ahah... that's not my motor or manifold... I got those pics off of skylines australia to show my friend... I had planned on welding the manifold like that but I found a great deal on the greddy manifold... Anyways I'm sure any experienced welder could do it for around $100

-Bluefire

[apex_7]

RB20DET in S13hatchSpearco FMICApex'i N1 Turbo-back exhaustSAFCMBC13.9@102203rwhp & 207rwtqsoon to have GReddy Emanage and hopefully a new turbo setup.

[krayton]

R33 RB25DET type 195 240SX Se

Front Mount w/ custom IC pipingCustom 3" DP w/ full custom 3" exhaustTest PipeCheap Crappy pod filter (soon to be changed)Greddy Boost Contoller (being shipped)

Hopefully make it to the track next Test N Tune and to a dyno.

pic 1 pic 2 pic 3 pic 4

[dekand]

hey kraton what kind of fans you have on your radiator?

[Wulfgang]

Finally! As of tonight I have an RB20DET-powered S14 (1995 SE) :ylsuper

Cranked up on first try too. And for anyone like me who wondered whether the RB20 has the same deep throaty exhaust note that the RB25 has.... YES! It does.

No pics yet, but here's what I have:

R32 RB20DET in 1995 240SX SER32 x-member & transmission mountsApexi N1 DualApexi Power Intake300ZX brakes all aroundStock O2 housing & DPWalbro 255KA radiatorKA gauge clusterR32 HICAS PS pump1 PermaCool 12" high perf. fan (yeah, it's not summer yet)

The O2 housing clears the steering rack, and the swaybar clears the oilpan. Tach seems to work fine, although it may be high by 1.5x (no bouncing issues or spurious readings at low rpm). Temp gauge works fine. Oil sensor (switch) works fine. I took the valve body out of the HICAS pump rear section, but did not remove the vanes. This seems to work right now, but we'll see.

I followed the wiring info I posted a while back and can now say that it has been tested and works fine

Yeah, I can't stop grinning.

[krayton]

dekand, im using 2 12" permas

[dekand]

cool thx

[HybridOne]

'96 240sx with 5-lug conversionRB20DETJIC-Magic Bullit Exhaust3" downpipecrappy cone intakeHybrid FMICJIC-Magic FLT-A2s300zx brakes w/ brembo rotors255L Walboro Fuel pumpSparco seats and wheel and stuff....S15 conversion to the front end in progress.HKS type1 turbo timertrying to find a good boost controllerSAFC IIAdvan Siena rimsJIC upper strut tower bars (front and back) carbon fiber2 10" electric fansUnstable Hybrid mounts

some other stuff...i can't think of it at the moment

http://www.simplydrift.com/RBS14/S15Bod ... 14/rbf.jpg

[apex_7]

hey krayton,Where did you get your koyo radiator?

[CAJones240]

I've got a R33 RB26 in a 1974 260Z. Custom intercoolerPower FC Nimo twin disk clutchsoon to have 720cc injectors. Has done 345 RWHP at 13.5 PSI. Would do about 400RWHP at 15 PSI. HP goal about 500.

http://www.nissaninfiniticlub....=9459

[rbsileighty]

I've got a R33 RB26 in a 1974 260Z. Custom intercoolerPower FC Nimo twin disk clutchsoon to have 720cc injectors. Has done 345 RWHP at 13.5 PSI. Would do about 400RWHP at 15 PSI. HP goal about 500.

http://www.nissaninfiniticlub....=9459

Not something you see everyday, good job!

What made you decide to snake the throttle cable out front?

[CAJones240]

Pathfinder cable. No kink

[frosted flakes]

CAJones240...

NICE!!! Excellent job. I like everything about that except maybe the purple paint. My friend i get 240sx parts from had an old 240z with a blue/red/white paint scheme and it looked killer! Nice engine!

[Yellow4g63]

89 240sx R32 RB20DET Griffen FMIC3"exhaust with High Temp resanotor (fake cat lol)HKS evc4Walbro 255lph pumpN/A z32 LSD

Thats all the stuff that I'm goin to put on the car to get it running. here is whats is after

PFC for RB20DET 977!!! Software for PFC 308 but still 977 shipped for the PFC lol6 Nippon Denso 660cc injectors"Protech"Intake manifold"Protech"exhaust manifoldprob a 50 Trim T3/T4E unless I wait and save for a GT30RPaint job for the car cause it looks like ***External gate and prob some other ship that I'm forgeting.

[NISMO_RB25]

hey nismo_RB25 what kind of fans are you using?

I am using the dual flex-a-lite 12 inch fans. I think the part was 220 something. I got them from summitracing.commine are puller fans. I am going to take them off and switch to a koyo radiator. Then put the fans on the opposite side, run the power to the ground and ground to power, and see if they will work as pusher fans.

my recommendation is to start out with pusher fans(flex-a-lite has the exact same setup, that is already setup as pusher).

My fans barely fit, and I had to take off the plate on one of them to clear the motor. They do a great job of keeping the car cool however, so I would recommend them. They completely cover the radior, which is what you want to try for. I am just not sure if I am going to have room on the otherside to fit them. That is what the dremel is for

[HotWIRED]

thanks, for the info nismo. Thats what I thought they were. I'm going to have get them this spring. I did't think they would fit.

[dekand]

krayton what are the dimensions on your fmic?

[krayton]

24" X 12"X 3"