how do i know if i got a wire problem or if my motor went out

[mmatl16]

my driver window just decided to stop going down on me last night. never had problems with it before.

[fredejo]

i have a 90 & the same thing happened. if i pushed the button i heard clicking inside the door, it was the plastic relay box inside the door panel near the back of the door, it's about 3-4 inches long, 2 inches wide & 1 inch tall. i broke it open & the solder connections had broken loose, i re-soldered them & it works fine. (wiggle the plastic connector while pushing the button to make sure it's the relay box before you go breaking it open), good luck...

[cdlong]

take the door panel off and find the motor. connect a hot wire to the appropriate connection on the motor. if the window goes down, the motor is fine. keep backing through the system until it doesn't work anymore. a wiring diagram from the FSM would help quite a bit. if you can't find one online, just have your dealer make you a copy of that page.

[mmatl16]

think it could just be a fuse?