How do i install a KA throttle body on L-series

[o_alcha3]

i have an l28et and i would like to upgrade to a KA throttle body i searched but could not find anything. 2 questions

1. do i use the ka24e or ka24de throttle body2. is there a DIY on it. if not how do i do it?

thanks all

[evildky]

4 bolts! bolting it on is the easy part, making it work can be a bit mroe difficult, as far as I knwo the TB's are all the same and the ka's, the only exception is some models ( I believe the stanza?) didn't come with cruise control so ti has one less thingy on it

things to think about, most people mosify the stock datsun linkage to work on the sx tb, I swapped in a z31 throttle cable and reclocked the sx linkage to run the tb upside down, also if you're runningstock electronics you'll need to keep your old tps, the tps screws don't line up, you'll either have to drill new holes or weld new tabs on the tps, I can't remember which I've run a few combinations