how do I adjust...

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
tony/ka24de
Posts: 257
Joined: Tue Jan 07, 2003 1:10 pm

Post

how do I adjust timing properly on sr20det? I have done it before but I forgot. And does anyone know the color of the stock temp sensor? My car had a yellow one. And I think it should be red? they are different sizes.


Nismo_Freak
Posts: 10314
Joined: Wed Jul 24, 2002 10:42 pm
Car: 89 Nissan 240SX

Post

- Warm up motor fully- Turn motor off - Unplug TPS- Pull out coilpack 1- Install spark plug wire into coilpack and to spark plug- Start motor- Set idle via idle screw to 750 - 800 RPM- Rev motor 3 times to 3000 RPM- Loosen CAS bolts- Adjust CAS until timing is even with the 2nd mark from the right- Tighten CAS bolts- Re-check timing- Turn off car- Reinstall coilpack- Plug in TPS- Drive to make sure it runs ok

User avatar
virus77
Posts: 1775
Joined: Thu Mar 25, 2004 9:43 am
Car: 95 S14, 71 240z, 97 e320

Post

you should put that in the stickys

Nismo_Freak
Posts: 10314
Joined: Wed Jul 24, 2002 10:42 pm
Car: 89 Nissan 240SX

Post

virus77 wrote:you should put that in the stickys
I plan to once I can get someone to come over and help me swap out the motors. I am building it as I swap my motor.


Return to “SR20DET Forum (rear-drive)”