How difficult is it to change out the cv axels on a 1998 Altima

Post by **Donaldrus** » Thu Mar 22, 2007 3:33 am

I am needing help in how to change out the cv axles on the 1998 AltimaI am new at this and trying to save a little money... could anyone give me some tips on how to change them out and if I would need any special tools

Post by **RICERMAN** » Thu Mar 22, 2007 1:31 pm

First thing you need is a service ,manual. In it you will see pictures and details about the repair. Its not that hard but doing it the first time will require most of a day

Post by **180fan** » Thu Mar 22, 2007 7:26 pm

It's not that difficult. The toughest part is getting the axle actually off the car. You'll also need to be aware of the brackets that are holding parts of the axles in place, and possibly an impact wrench to get the axlenut off. Don't forget to get new cotter pins.

Post by **RICERMAN** » Sat Mar 24, 2007 8:18 am

You are right. Replacing the struts would be harder dont you think so?

How difficult is it to change out the cv axels on a 1998 Altima

How difficult is it to change out the cv axels on a 1998 Altima

Re: How difficult is it to change out the cv axels on a 1998 Altima (Donaldrus)

Re: (180fan)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums