Hose from old intercooler pipe goes?

[boozy]

Hi... not my intercooler is mounted but i ran in to some problems, on my old piping from the stock intercooler there was a hose

but where should i put it now? have dont have an OEM or Aftermarket bov, and i dont wanna make som nipples on pipes, it must be a hose what i can connect it to, right now i have put a bolt in the hose but it seems that when the turbo makes some presur it makes a click noise,

Can i take the hose and connect it to that one what also have a bolt in ( think that is from the OEM Blov off)

Hope you can help me in a hurry

[Gabes13]

Im not sure what youre trying to say.but if youre not running a bov then you can just cap the nipple on the ic pipe.

if youre running a different ic pipe without a nipple and running a bov, you can get vacuum from a port on the throttle body.

edit: 1st pic, hose goes from ic pipe to wastegate on the turbo.

[OutToWinPAHC]

Wait do you have a BOV or not. You said I dont have an aftermarket or OEM BOV.

I dont know SR's at all, but my guess its for your boost control.

[boozy]

as i have been told its that hose whats messures the pressure in the pipe but where schould i mount it??

and no i done have an bov at all, eather a HKS,blitz or the original bov...

can i take that hose over to that hose on picture number two?

[OutToWinPAHC]

no i done have an bov at all, eather a HKS,blitz or the original bov...

This is what I am interpreting. "No I don't have a BOV at all, its either a HKS, BLITZ or OEM BOV". Which sounds like pure contradiction.

To me I see a hose under boost going to the wastegate which is controlling boost. Looks to me like your gonna need that hose. You have to measure boost somewhere. Now I cant help you from here so I'll let the SR guys take it from here.

[boozy]

yir i need it, i have bolted it up. and thats dont work, but i was thinking if there was a hose on the intake plenum that i could connect it to that would be great...

[boozy]

I think that i have get it now... here is a photo, can it be right that i have to cut that hose from the activated carbon canister??? here is a photo



http://i13.photobucket.com/alb...e.jpg

[hock08]

can you tell me what the 3 outlets on the throttle body pipe are for?

[S13xCrazy]

so much english fail in this thread. I'm confused as hell.

[ZOMG.SR20]

[Tommy_ner]

I think that i have get it now... here is a photo, can it be right that i have to cut that hose from the activated carbon canister??? here is a photo



http://i13.photobucket.com/alb...e.jpg

No you dont have to cut the hose from the activated carbon canister.Use the hose to the bov. The hose in the second picture in the first post.

picture of how I did it

[hock08]

on your intercooler piping on your throttle body side where it y's off to the left of your fan shroud where does that hose lead? and what about the two little nipples on the back side? are they for boost gage and brake booster?

[Tommy_ner]

if you mean the black hose that runs from the aluminum tube, it is for the blow off valve. And the blue vacuum hose go form the intake manifold on to the bov and further on to wastegate control velvet.I hope the answer your question.
Modified by Tommy_ner at 11:32 AM 4/15/2009

[hock08]

thanks alot man you just saved me a headache