Horsepower thread!!!!

[27RB240]

Hey, anyone with VGs and VEs (na or turbo or even twin turbo) feel free to post horsepower posts here!!! Tryin to get somethin started here!!!!I see somethin good for this place!!!!

Also try to include upgrades, like turbo, Ic, tuning, ect............ And if you have the weight of your car (I know that it has nothin to do with horsepower, but its a variable for track racing and stuff)

If you have also ran at the track, feel free to tell your 1/4 mile times and or 1/8 mile times....

[nsrZ32]

VG30DETT here

650-675hp

Pretty recently updated mod list can be found herehttp://www.northshoreracing.com/My300z.htm

[Assmunke]

My 86 is pretty much stock for now, gotta save up money for a downpipe to get my exhaust fabbed. all i have on there now is a K&N, MBC is soon to come.

[homestar]

87 300zx

220 RWHP/255 RWTQ

'87 VG30E W series block, heads, and cams'88 T Injectors and rails'84 T ECU'84 Stock T3 @ 8 PSI w/crappy spring loaded boost controllercertafied muffler 2.5" turbo back exhaust

[nsrZ32]

^^ nice!

[speedracermattg]

90 300ZX TT 311RWHP 340something at the wheels torque

[greensparcs]

not exactly sure what the horsepower is or torque but i got a 90 z32

19 pounds boost on stock turbo555 cc injectorsjwt ECUlabree exhaust.

i know im somewhere in the 320's at least ideas anyone?

[mtcookson]

1990 Nissan Maxima:

JDM VG30ET (basically like the 87-89 Z31 VG but with a Maxima intake manifold, came out of the Gloria I believe)Custom exhaust and intake for relocated turbo... but both very crappy and restrictive (working on that now)S-AFC II

I believe I did around 210-215 fwhp during the test run. The real runs the intake pipe kept blowing off so I didn't get a good recorded run.

That's running the stock early Z31 T3. I'm now putting on a Holset HY35, completely redoing the exhaust manifold setup as well as the intake, and I'm adding an aftercooler.

Tuning will be with a Romulator... I just need to start working on it all. :lol:

Here's my old page with all of the Maxima info. Its pretty old but is up to date for the most part. http://members.cardomain.com/mtcookson

[DunnJH4]

Last owner had dynos at 465 hp... cant remember tg, but once i do a lil work I'll run to a local dyno and check it for sure.

1990 300zx TT (new engine) Megan racing downpipes, test pie and straight through exhaustAsh ECU Stage 3 chip set Pop Charger555 cc injectorsZ1 chrome inlet plenum and hardpipesAGX adjust. shocks

[evildky]

my 91TT with 200k miles, all stock except the K&N drop in air filter and crush bent exhaust, dyno'd 240WHP on a mustang dyno

NSRZ32, have you had your car on a dyno or drag strip? know what your car weighs?

[91300zx]

Only 240 rwhp for a tt? **** man, my n/a dyno'd out at 206 the first run and then once it got fired up I got 214 out of it... Push it harder my dude.

[96SoftTop]

He's also got 200,000 miles on it...That might have somethin gto do with it?

Ken