how much horsepower can a Q45 pump out of its VH45DE or VK41 engine?!?!?!? 0-60mph seconds?? srry i jus so carious about learning about the Q
it says 278, but i read articles saying it pumps 300. i wnt 2 kno how much hp to the wheels like dynoed
Modified by q45vh at 8:53 PM 7/10/2007
Horsepower
-
paranoidjack
- Posts: 1417
- Joined: Mon Oct 03, 2005 3:57 pm
- Car: 2012 Infiniti M56 S
2003 Infiniti M45
2001 Infiniti QX4
2000 Infiniti Q45
1998 Nissan Pathfinder
1996 Infiniti J30
-
elwesso
- Posts: 30810
- Joined: Sun Feb 23, 2003 4:52 pm
- Car: 94 Infiniti Q45t 5 spd
2007 BMW M Coupe
2007 Infiniti G35 S 6MT - Location: Indiana
- Contact:
Re: Horsepower (paranoidjack)
about 300.
Open the hood and there should be a sticker on the engine.
Open the hood and there should be a sticker on the engine.
-
maxnix
- Posts: 22627
- Joined: Mon Jul 22, 2002 8:11 pm
- Car: 1995 Infiniti Q45
1995 Infiniti Q45t
2000 Infiniti Q45
Re: Horsepower (elwesso)
Not to the wheels. More like about 234 hp, or more importantly, 330 ft. lb. of torque at the crank. Depends on conditon, which dynamometer, fuel, tires and barometric pressure.
-
Q45tech
- Moderator
- Posts: 14296
- Joined: Tue Apr 30, 2002 3:19 am
- Car: 1990 Q45 342,400 miles 22 years ownership with original engine
1995 G20t 5 speed 334,000 miles 16" 2002 wheels - 205/50/16 Sr20ve vvl
Re: Horsepower (maxnix)
Real engineers NEVER use the horsepower word because it varies so much with rpm.
Notice how adverts push flat torque curves.
If acceleration is to be measured one uses torque as the calculations are simple and straight forward.
Notice how adverts push flat torque curves.
If acceleration is to be measured one uses torque as the calculations are simple and straight forward.
Since everyone's being vague and all over the board here are my numbers taken within the last 4 months.
Dyno 222.2 HP0-60 7.2 sec.
Major mods in progress since then and had a bad knock sensor for the Dyno test but those are my "mostly stock" baseline numbers. Had NICO stage 1 ECU and custom made CAI.
Dyno 222.2 HP0-60 7.2 sec.
Major mods in progress since then and had a bad knock sensor for the Dyno test but those are my "mostly stock" baseline numbers. Had NICO stage 1 ECU and custom made CAI.