Hopefully someone replies about these rims

[zacreth]

Hey guys I'm looking for some answers to a question I have about some rims hoping that they will fit.I have a '96 240SX SE with 5 lug stock rims. I want to put on rims that are 18x8, offset 40, bolt pattern 5x114.3, and a bore of 72.6.Any replies would be great and also would a bolt pattern of 5x100 or 5x112 work? because with those I can get a 35MM offset.Thx guys

[turtl631]

only 5x114.3 will work. If the hub bore is bigger you can get hubcentric rings, but if its smaller it would need to be machined. 18x8 +40 is a garbage size though. Too tall and overly high offset, those will NEVER clear coilovers in front, and will be really sunken into the fenders.

[chmercer]

dont buy thoes, waste of money, will be ugly, wont fit on the front if you have coilovers, etc etc etc.

[GhostDriver]

I want to put on rims that are 18x8, offset 40

AhHhhhhhhh!!!

Don't do it man. Rock those OE rims with pride in the mean time

[zacreth]

Thx guys for the info. They were the Enkei ZR1 series. I am interested in 18" size but 17's will do if they look similar in design. I plan on getting the TEIN SS coilovers if that helps. Any suggestions?

[Exar-Kun]

I've got a suggestions..search these forums for fitment threads, I am entirely too tired of discussing why you shouldn't be slapping FWD offset skinny wheels on your car, much less overly wide negative offset wheels..

-Chet